free hit
Rear shock spring replacement / upgrade - Suspension/Brakes/Wheels/Hubs/Steering/Geo - The Lotus Forums - Official Lotus Community Partner Jump to content


Rear shock spring replacement / upgrade

Recommended Posts

OK, I've just spent some time going through old threads and reviewing the LEW pages regarding replacement of the real shocks and springs and it seems like a fairly straightforward job... Does anybody have any experience fitting the SPAXX replacements? Is there anything different about them? As some of you may remember, the fronts both failed early last year and I chose to upgrade to the SPAXX front end (which I absolutely cannot say enough about!). I plan on going the same route for the rear and just wanted to get opinions on how rough a job this would be in my own garage.

Link to comment
Share on other sites

Upgrade today to remove Google ads and support TLF.
  • Replies 11
  • Created
  • Last Reply

Top Posters In This Topic

Just fitted a new pair of lotus rear shocks to my v8 due to 1 spotted leaking on MOT test....... all done in 1 evening. Hardest part was slackening off the seized top nut on the drivers side ( less room than the other side ). If you feel safe about jacking your car up, its an easy DIY job. GO FOR IT !

Link to comment
Share on other sites

  • 2 months later...

OK, I've been very lazy and been putting this off for ages. I've finally got the car apart and am ready to pull the old damper unit. A couple quick questions...

What are the torque specs for the upper and lower bolts?

I am going to be reusing my old springs as they were replaced by the PO. Is there any trick or gotchas or anything else to beware of when transferring the spring?

Link to comment
Share on other sites

As you've done the fronts I assume you know to be very careful when releasing the spring.

The backs are quite easy as you can slacken your spring perch off, put the spring on and simply jack up that corner until you can get the bolts on to secure the top of the strut.

Link to comment
Share on other sites

  • 2 weeks later...

Sorry for the delay!

Right now, the rear is about 1/2 inch lower than it was with the factory setup but I may go another 1/2 inch once I let the units settle in a bit.

random pictures, no particular order:



















Edited by talon
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...