free hit
counters
oil cooler - Misc including parts cross references - The Lotus Forums Jump to content
Sign in to follow this  
flyingvking

oil cooler

Recommended Posts

On my 91 carb esprit i need to replace the oil cooler(single 330mm cooler in center of car) so i need to know the thred size, also the old cooler has managed to damage the tread in the pipe!! i know the sizes would be bsp size but were would i get a tap to repair the damaged thread in the pipe?? pls help :)

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

It's either 5/8 or 1/2 BSP, and I'm 90% certain it's 5/8.

Tap? could be difficult, try this instead.

Go to a local hydraulic hose specialist and buy one fitting of the correct size, 90degree type. cut the old swage ring off your pipe (cut along it without cutting into the rubber pipe). Use two good quality hose clips to hold it on. It should be fine, as the oil pressure isn't really that high, and you can ask the hydraulic hose specialist (who will supply the hose clips as well if you don't have some) to confirm it will be fine (just remember to let them know the max oil pressure the car can achieve).

Andy

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×