Wheel house for front wheel arches

[LL-2-11 0]

I've read about the use of rubberised Spray like 3M Bodyschutz to prevent the front wheellarches (by flying stones) . But I've heard of people who took a Exige wheel house for their 2-11. Does somebody have any experience with it? How it's mounted?

I don't want to take the spray, which sticks there forever. I already have spidercracks, so body repair and paintshop will be necessary some day. Glue inside doesen't make that easier...

[Bruss 458 1 Vehicles]

I have glued some sound deadening mat in the wheel arch. Something like this http://cgi.ebay.co.uk/MAXMAT-MAXPRO-DYNAMAT-SOUND-DEADNING-6-SHEETS-PACK_W0QQitemZ260583328709QQcmdZViewItemQQptZUK_Audio_TV_Electronics_In_Car_Entertainment_GPS_Car_Speakers_PP?hash=item3cabfa0bc5

I have also put a section of carbon finish vinyl over the outside to stop water getting in to the spider cracks from above.

http://cgi.ebay.co.uk/Large-Carbon-Fibre-Vinyl-Sheet-1metre-x-610mm-3ft-x-2ft_W0QQitemZ250465865387QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3a50edceab

[Jack 452]

I've also used something similar .... sold under the name of "Dynamat" ... very malleable and has held up well. Don't forget to fashion some sort of oil cooler protection -- otherwise the coolers will get quite beat up.

[ads_green 12]

I like the oil cooler shields - where you get the bits?

(or how much to fabricate another pair? )