Proper ride height measurement

[actwon]

So, I have just fitted some SPAX adjustables on my car. Now, I am wondering what the proper way to emasure ride height is? I wasthinking of taking 3 measurements.

1 on the drivers and passenger's side of the car and 1 from the center hoop on the chasis below the motor. any ideas?

[Rob]

Its in the hand book somewhere - towards the back in the tech section. Measured under the rear hoop and front under the chassis IIRC. You have to measure with passengers and fuel i think..

[actwon]

Its in the hand book somewhere - towards the back in the tech section.  Measured under the rear hoop and front under the chassis IIRC.  You have to measure with passengers and fuel i think..

<{POST_SNAPBACK}>

From racing I was told to measure these 3 places to make sure the sides are equal height. Now, I;m sure if the person who instructed me on this was just anal or if it is really necessary. It makes sense to me.