S1/S2 parts wanted

[ddh]

Hi,

Any one got any good drive shafts for sale or passinger side sill, or any rad fans.

[Kato]

Have you tried lotusbits.com? Tell them LEW sent you.

[ddh]

Hi,

Yes tried lotusbits.com he has no rad fans or sills.

[catty s2]

Hi,

Yes tried lotusbits.com he has no rad fans or sills.

<{POST_SNAPBACK}>

SJ Sportscars in Devon. Alloy fan blade

[dglotusltd]

SJ Sportscars in Devon. Alloy fan blade

[Tony K]

I've got 3 fans I just took off my US Federal S1.  If your desperate contact me off list at [email protected]

The shipping is going to be wicked.

DomG

<{POST_SNAPBACK}>

Lee, if you don't want to buy Dom's fans, then I'd like to buy them from him.

Dom, if Lee doesn't buy your fans, and you're selling them cheap, I'd like to buy them from you.

Without meaning to be self-serving, make sure they are the same; manual shows different fans between Federal and UK/RoW. Later S2s (Federal at least) had a different fan arrangement, too - two larger instead of three smaller.

- Tony

[ian heighway]

Hi,

Any one got any good drive shafts for sale or passinger side sill, or any rad fans.

<{POST_SNAPBACK}>

whats wrong with your drive shafts?

I had mine re-con'd by:- DES SHELLEY SHAFTS unit 1&5 Great Brickkiln Street, Wolverhampton, WV3 0BD, Tel:- 01902 771969.

I think it cost me

[ddh]

Thank you all for your replys Tony you buy Dom's fans i will look for UK ones or motor bike ones, but thanks for the offer Dom.

My drive shafts seam to have alot of play were the uj's fit i have put new uj's in but it did no good, i am going down to Lotusbits.com to day to get two second hand ones if he hes two good ones.

[ian heighway]

If the shafts are still no good still give DES SHELLEYS a ring he can repair almost anything and evern make new 1's if he has a patter to work from.

any bike breaker will have the fans but i got 2 of mine off e-bay

Edited February 26, 2006 by ian heighway

[ddh]

Yes a picture would be cool thanks, and thanks for your advice.

[ian heighway]

hi again found a pic of the fan set up on my car before i put the body back on hope this helps

[ddh]

Hi, the picture is great thanks a lot.

[Tony94S4]

hi again found a pic of the fan set up on my car before i put the body back on hope this helps

<{POST_SNAPBACK}>

Hi Ian

what year of the CBR were the fans off?

will they work on the S2 also ?

is the radiator frame same on the S1 and S2?

thanks

Tony

[dglotusltd]

Tony,

I don't think the radiator bucket (the thing it sits in) is the same on an S1 and S2. I thought the S2 rad was bigger and sat on a angle while my S1 is verticle in position. Hence the assembly it sits in would be different.

Anybody confirm this for Tony?

DomG

[USAndretti42]

I can confirm the S2 radiator sits at an angle to the vertical. On mine, the radiator is about two thirds of the width with the air conditioning condenser in front and offset to the right.

[Tony94S4]

I can confirm the S2 radiator sits at an angle to the vertical.  On mine, the radiator is about two thirds of the width with the air conditioning condenser in front and offset to the right.

<{POST_SNAPBACK}>

well since there is a difference do you guys

think the fans that Ian used will work on the

S2 or is there any other better fans out there?

its sad the car has not been driven in the last

few summers I am trying to change that, also

are there any cross reference or better radiators

out there?

Thanks again

Tony

helping a friend with S2

Texas summer almost here