free hit
Keyless/engine venting mods - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC - The Lotus Forums Jump to content
Sign in to follow this  

Keyless/engine venting mods

Recommended Posts

Just finished installing a mod to cool down the engine bay in my TE. I found the engine bay needed more cooling in idle states ie: traffic etc. Seems to be working well. The fan that normally would switch on via a series of sensors and switches now can be turned on manually using the existing defroster switch found on the dash. Simply disconnect the existing connectors on the window, route new wiring to the engine cover connector and thats it.

Another mod was installing a keyless entry kit purshased at Princess Auto about 5 years ago. Finally got to it and now doors open and close remotely. Routing wiring from the doors into the cab was the toughest part. There was quite a bit of fiddling with actuator rod position but eventually got it right.

Now time to deal with a gurgling sound coming from my fuel pump.....??????

Happy Lotusing!

Oh yes, forgot to mention that the temp sensor on the underside of the cover must be jumped. Disconnect the two leads and connect them together.






90 SE

Share this post

Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...