free hit
counters
WTB Turbine wheel - Wanted - The Lotus Forums Jump to content


WTB Turbine wheel


Recommended Posts

This is a copy of a post I have placed elsewhere.

I know there is a WTB spot under for sale and wanted but people don't always look there.

AND THIS RELATES TO THE FORMER POSTED (BELOW) Dumbish question about oil level and smoke.

I have a 918 motor here that has been giving me fits with a rebuilt turbo (left bank) and smoke.

Went through all the oil level tests I could think of just in case it was an over fill causing the smoke.

All the tests where done just to satisfy my curiosity as the right bank never smoked, so I knew from the beginning that the

level could not cause the problem or they would both smoke.

I have determined a quick dip stick test to verify that the 'Olive' is in the correct 103mm spot.

Since you cannot pull the tube up with the head installed on the engine a quick way to check is to:

1) make sure vehicle is flat and level

2) fill the engine up to the full mark

3)put a catch bucket under the turbo

4)get down to the turbo oil return and remove it- allow the oil to empty out of the pan nipple for about 15 min.

5)Now check the level on your dip stick it should be rite at the lower 'Fill' mark. If not loosen the union and adjust the tube until it is.

6)Reinstall return

7)Replace apx 1 qt and now it should be at the 'Full' mark.

In my estimation the engine would have to be at least 2qts over full to cause a resting level high enough to seep past the seal rings over night.

Remember when the engine is running the level is considerably lower and not likely to back up into the turbo.

Which brings me to what I really posted about-

The smoking on this vehicle turned out to be a bad turbine shaft.

The pinch or squeeze seal ring on the turbine side of the shaft is located in a ring groove just like a piston ring on a piston.

The groove on this one is totally worn out the ring has no surface to seal against and thus lets oil into the exhaust.

What I need is a replacement shaft- new would be great- high quality used OK.

Garretts part # is 4359.2-1

This is for the 918 motor with the TB 25\31 turbos.

ANY help locating this part by LAST week would be appreciated.

I would gladly purchase a rebuildable core If there is one available.

Thanks in advance- Tim H

Dynoauthority

Redmond WA

425-869-8324

If wanted I could post pictures of a good vs the bad seal ring and groove.

Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport

Evora NA

For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. 

Link to post
Share on other sites

Great cataloge. Has everything you need to know accept the 10 fin tubine wheel of the lotus TB2531.

Interestingly the SAAB 9000 is a nearly perfect match aside from the 11 fin count and the 6.6mm tip height.

Thanks for the reply- Tim H

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...