Scoville Posted February 9, 2011 Report Share Posted February 9, 2011 I need some help from the experts in here. I have found some rims that the fronts are 15"x7" with an approximite 4.25" backspacing. The rears are 15"x8" with approx 4.5" backspacing. Bolt pattern are 5x130. Will these bad boys fit? Working on finishing the carbs at the moment abd therefor not up to speed on the wheels but by chance I might have to pounce on these. Thanks Rasmus Quote Link to comment Share on other sites More sharing options...
Scoville Posted February 10, 2011 Author Report Share Posted February 10, 2011 Basically the question is, is there a way to fit a 5x130 to a 5x120 hub and not have the wheels stick out? Quote Link to comment Share on other sites More sharing options...
silverfrost Posted February 10, 2011 Report Share Posted February 10, 2011 Hi, The backspace measurents you wrote down mean nothing as just having a measured back space does not tell you the offset, So going off this would be impossible to say if they would fit or not, Also the 5 x 130mm is a pain as its only 10mm out from the lotus bolt pattern so think even hub adapters would be out of the question as the thread wall on the hub adaptor would be to thin, I know some companys can change the pcd on hubs but it would probably be easier to buy the correct wheels or something nearer in the first place. I personally would not touch these wheels, to much work even if you could get them to fit. regards danny Quote A Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.