Scoville Posted January 1, 2012 Report Share Posted January 1, 2012 Anyone know if there is a guide to installing the star washer on the throttle axle? I just got two home after remiving a warped axle and I am stumped... Quote Link to comment Share on other sites More sharing options...
richardvg Posted January 1, 2012 Report Share Posted January 1, 2012 hi Rasmus not sure which part you are referring to but maybe post a pic or drawing.. Quote Technically sound ...Theoretically poked ! Link to comment Share on other sites More sharing options...
Scoville Posted January 2, 2012 Author Report Share Posted January 2, 2012 I think it is called the "spindle star washer" it goes between the orhe side of the butterflyvalves from the bearing to help seal that side. I'll get the part number. The carb rebuilding book doesn't even mention them and Dellorto uk didn't send any info Quote Link to comment Share on other sites More sharing options...
Scoville Posted January 2, 2012 Author Report Share Posted January 2, 2012 #77 in the dellorto parts breakdown blue prnt. It holds 75 and 76 in place. Quote Link to comment Share on other sites More sharing options...
jonwat Posted January 2, 2012 Report Share Posted January 2, 2012 You need to specify which blue print you're talking about, I take it that it's not this one. Quote Cheers, John W http://jonwatkins.co.uk Link to comment Share on other sites More sharing options...
Scoville Posted January 2, 2012 Author Report Share Posted January 2, 2012 In that blue print it is #112 it holds #111 and #113 in place on the spindle... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.