woza Posted June 7, 2012 Report Share Posted June 7, 2012 Got a note from the ferry company today ahead of my leans trip and they have asked me to disable the alarm for the crossing. How does one go about that then? Woza. Quote Link to comment Share on other sites More sharing options...
Bibs Posted June 7, 2012 Report Share Posted June 7, 2012 Once you've locked it, press the button again and it'll bleep. That's the interior and motion sensors off but immobiliser on. I think. Quote 88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport Evora NA For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. Link to comment Share on other sites More sharing options...
Gold FFM TomE Posted June 7, 2012 Gold FFM Report Share Posted June 7, 2012 Think you're right Bibs. I know it's covered in the handbook as I remember reading about it last weekend. Quote Link to comment Share on other sites More sharing options...
woza Posted June 7, 2012 Author Report Share Posted June 7, 2012 Once you've locked it, press the button again and it'll bleep. That's the interior and motion sensors off but immobiliser on. I think. Thanks Bibs Quote Link to comment Share on other sites More sharing options...
Gold FFM TomE Posted June 7, 2012 Gold FFM Report Share Posted June 7, 2012 Just checked the handbook - the double blip only disables the interior volumetric sensor, for example if you've left a child or pet in the car. If you want to secure the car but not set the alarms you need to lock the doors manually, either by pressing down the lock button and holding the handle up as you shut it or by using the key in the door lock. The immobiliser will arm itself but the alarms won't be set. 1 Quote Link to comment Share on other sites More sharing options...
bingoking Posted June 7, 2012 Report Share Posted June 7, 2012 I have never disabled my alarm on any car I have taken on a cross Channel Ferry crossing and it has never activated. I did however disable the alarm on my wife's Audi this year on the Portsmouth-Bilbao crossing as we were crossing the Bay of Biscay which can be quite rough and it was a 24 hour crossing. If the alarm had activated I didn't want to risk it draining the battery. Quote Join Lotus Enthusiasts Group Scotland here! and on Facebook Link to comment Share on other sites More sharing options...
Al Posted June 8, 2012 Report Share Posted June 8, 2012 In my experience I've been on various Scottish ferries of differing sizes with alarm on and no problems. Other alarms did go on cars but not the Evora. Quote A LEGS man and proud to declare it! Lotus Enthusiasts Group Scotland Autocar's Best UK Drivers Car 2009. Car's Performance Car of the Year 2009; Evo's Car of the Year 2009. Top Gear Sports Car of the Year 2009 Link to comment Share on other sites More sharing options...
Gold FFM TomE Posted June 8, 2012 Gold FFM Report Share Posted June 8, 2012 I know the Evora has volumetric and perimeter alarms but has it got a movement sensor to prevent it being stolen by lifting? Not mentioned in the handbook and that would explain why it isn't set off on ferries. Quote Link to comment Share on other sites More sharing options...
Bibs Posted June 8, 2012 Report Share Posted June 8, 2012 It has a perimeter alarm? Quote 88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport Evora NA For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. Link to comment Share on other sites More sharing options...
Gold FFM TomE Posted June 8, 2012 Gold FFM Report Share Posted June 8, 2012 As in the perimeter entry points have sensors - doors, boot Quote Link to comment Share on other sites More sharing options...
MHC Posted June 8, 2012 Report Share Posted June 8, 2012 I had always assumed that car perimeter alarms were set off by the alarm picking up the current draw from the battery when you open the door/boot, e.g. from the interior light (and ditto doing anything else that draws a current)? Different to the kind of perimeter alarm you get in a building. Quote Link to comment Share on other sites More sharing options...
Bibs Posted June 8, 2012 Report Share Posted June 8, 2012 Oh. I thought you meant, something more like this... Quote 88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport Evora NA For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. Link to comment Share on other sites More sharing options...
Counterdoc Posted October 12, 2020 Report Share Posted October 12, 2020 On 07/06/2012 at 22:04, TomE said: If you want to secure the car but not set the alarms you need to lock the doors manually, either by pressing down the lock button and holding the handle up as you shut it or by using the key in the door lock. The immobiliser will arm itself but the alarms won't be set. I know this is a super old thread, but would this also solve the problem of a draining battery caused by the active alarm system? Quote Link to comment Share on other sites More sharing options...
agentdr8 Posted October 12, 2020 Report Share Posted October 12, 2020 It won't solve the quiescent drain issues completely, but it'll reduce it somewhat. The microwave sensor apparently draws quite a bit of juice, so by leaving the alarm disarmed (or by pressing the fob lock button twice), you at least negate that. But the ECU and other components seem to constantly draw power, so having it on a tender after about a week is probably always going to be a constant. 1 Quote Link to comment Share on other sites More sharing options...
Counterdoc Posted October 12, 2020 Report Share Posted October 12, 2020 So pressing the fob knob twice has the same result as the other two mentioned methods? Quote Link to comment Share on other sites More sharing options...
agentdr8 Posted October 12, 2020 Report Share Posted October 12, 2020 It should. The double-press locks doors, enables the immobilizer, but disables the microwave sensor. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.