Esteve 0 1 Vehicles Report post Posted July 30, 2012 Short story, good engine, 1k miles, case of insurance scamming by previous owner. We need the wiring harness to crank this babe over and our attempt to make one by hand resulted in another fire that removed our previous repairs. We also need some exteroir and interior rear parts, and the passenger side door panel "the carbon fiber panel distorted abit". We will likely be needing some more engine parts such as connectors and new hoses, what not. Right now thou, harness is the main thing. Thanks! Further if you know of a suitable replacement part , someone once told me that GM should have the harness I need. That'd be great, thanks. Share this post Link to post Share on other sites
peteh 0 Report post Posted August 6, 2012 Hello i broke a 94 s4 a while ago send me a complete list i will try and help oh i also have an engine wirring harness from a sport 300 new. Share this post Link to post Share on other sites
Esteve 0 1 Vehicles Report post Posted August 8, 2012 I am happy to find someone with the parts! I am out of town this month so communication will be slow but I am excited and will try to go off memory for what I am needing. Sending pm soon, thanksHeh looks like your inbox is full can you email me a pic of the car at [email protected] dot com Share this post Link to post Share on other sites
davevr6car 34 Report post Posted August 8, 2012 Hi Peter, I noticed you mention in a previous post that you were breaking a S4. I'm looking for a rear bumper. Do you still have one from the s4 in good condition. cheers Dave Share this post Link to post Share on other sites
sanj 12 Report post Posted August 10, 2012 Hi Peter, Would you by any chance have the power steering hose that goes from the engine-driven pump down to the frame? It has a metal u-shaped bit with a straight rubber hose. Cheers, Sanj Share this post Link to post Share on other sites
peteh 0 Report post Posted August 12, 2012 sorry the pipe has been sold SanjiDave the rear bumper has gone i have the front spoiler etc. Share this post Link to post Share on other sites
sanj 12 Report post Posted August 13, 2012 Thanks anyway, cheers. Share this post Link to post Share on other sites
rizla603104 73 1 Vehicles Report post Posted August 14, 2012 (edited) I have the following things I could do with if you have any of them: Catalytic convertor Gear Knob Drivers Side Fuel flap hinge Wiper Motor, Wiper connection to Tapered Spline and Tapered Sline Can you help with any of these? Thanks in advance Edited August 14, 2012 by rizla603104 Share this post Link to post Share on other sites
Esteve 0 1 Vehicles Report post Posted September 14, 2014 Another swing at old project, have my rear windows and fuel flap now. Needed, Rear Bumper, tail brake/blinkers and harness (sourced 1 harness), hatch grills n spillguard, likely going to have company produce my harness for engine. Share this post Link to post Share on other sites
deecee 2 Report post Posted September 28, 2014 If you find a company that will do the engine harness, let me know, I am trying to find one myself. Share this post Link to post Share on other sites
johnpwalsh 1,110 4 Vehicles Report post Posted September 29, 2014 Hi, do you still have a near side sill cover by any chance. John. Share this post Link to post Share on other sites
Esteve 0 1 Vehicles Report post Posted November 2, 2014 Just an update and to answer questions. I will soon be selling this project. I just don't have the time or facility to do this all myself and don't want to get it sent off anywhere $$$. Johnpwalsh, I near side sill cover? not sure what that is can you detail it and it's location better? Deecee, I will give one final look at a company. I do have my old half charred/melted speaker wire repaired harness, it can plug up but not going to risk it. They can use it as a template so theres that. I will post some photos of the harness in hopes it helps you. Share this post Link to post Share on other sites
