Bibs 7,542 4 Vehicles Report post Posted January 29, 2013 I'm also after the size of the V8 AWI monobloc wheel centres, thanks. Share this post Link to post Share on other sites
Günter 27 1 Vehicles Report post Posted January 29, 2013 can do it .. 'in some hours' ...if I can find sleep tonight Share this post Link to post Share on other sites
Vulcan Grey 219 1 Vehicles Report post Posted January 29, 2013 I may be able to pop one of mine out... Share this post Link to post Share on other sites
Günter 27 1 Vehicles Report post Posted January 31, 2013 do you have it -Travis ? ..AWIc is around 55mm diameter, partnumber is A120G0046F ..and as the diameter suggests, it fits Elise/Exige too http://www.deroure.com/partinfo.asp?MAK=1&MDL=15&TBL=1516&SMA=0&SMO=0&ST=&SC=0&PBID=43171 Share this post Link to post Share on other sites
Vulcan Grey 219 1 Vehicles Report post Posted January 31, 2013 Actually I think I have 3 or 4 different ones on my car from when I bought the wheels from Johan... Some fit better than others. Haven't had a chance to measure yet. Share this post Link to post Share on other sites
Günter 27 1 Vehicles Report post Posted February 1, 2013 (edited) have measured my on the V8 yesterday ..that's why I say it's 55mm "ish " on the top , and as I've bought the wrecked Elise there were some who looked in a better state than my own ones, so the AWIc on my Esprit have mixed ones (the Elise wreck has got all the scuffed ones now) -as the partnumber says, it is interchangeble ..it is the same part on the Elise wheels as on the V8 AWIc see also here: http://www.thelotusforums.com/forums/topic/55115-oz-monobloc-centre-cap-diameter/#entry442489 Edited February 1, 2013 by Günter Share this post Link to post Share on other sites
Bibs 7,542 4 Vehicles Report post Posted February 1, 2013 They're the same front & rear too? Share this post Link to post Share on other sites
Günter 27 1 Vehicles Report post Posted February 1, 2013 (edited) jip -just a plug & play ..there is only one number as it looks So far I have only seen three main designs -the one with the big round circlip on the rear, as a supporting spring for the nose-clip ..don't know where this version fits. ..the more short *6spoke AWIc V8* & Elise/Exige ones with big 55mm dia on the outside label (only held by plastic nosees in the rim) ..and the longer Esprit GT3/ OZ-S350magnesio ones (different diameter to the AWIc, and again only hold on by plastic nose, but nose -respectively groove in the rim- is in a different position.) Edited February 1, 2013 by Günter Share this post Link to post Share on other sites
