free hit
counters
S1 / S2 Silencer Internals - Induction/Turbo/Manifold/Exhaust - The Lotus Forums Jump to content
Sign in to follow this  
gtookey

S1 / S2 Silencer Internals

Recommended Posts

Wondering if anyone has a picture of the internals of an S1 S2 silencer. I would like to make a more free flowing silencer. Buying one from the UK is expensive, so I was thinking I would cut the original one open, gut it and straight pipe it from inlet to outlet then close it up, thus keeping the original look. As I have a federal spec silencer I'm sure it's more restrictive than UK/ROW. Cheers.

Share this post


Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.

If you are going to gut it Gavin, just cut it open along the seam and go from there? Unless you need to know to cut it open?

Share this post


Link to post
Share on other sites

i replaced mine with a magnaflow,,ordered it the same size as the original so it fit perfect,,and sounds really nice,,,and its pretty much straight thru,,no restrictions,,

Edited by s1guy

Share this post


Link to post
Share on other sites

I was looking at replacing mine with a Magnaflow as well. Which one did you use Ken? I was going to try the 7" single in/dual out.

What did you use for tips?

Share this post


Link to post
Share on other sites

Hi guys...thanks for the replies.

 

Jim, were you looking at Part# 13761?

 

Ken, also interested to learn what you went with.

Share this post


Link to post
Share on other sites

Gavin

 

I was looking at Part #12761. I thought is was closer to the original spec muffler.

Share this post


Link to post
Share on other sites

sorry for the late reply,,my magnaflow is single in single out,,had a muffler shop make me a tailpipe ,my tailpipe goes to twin tips,,makes it nice because you can slide the tailpipe in,out and twist it  to get it to line up perfect in the valance,,my valence is currently off,so when i get home tday i,ll take a pic and get the part number,,,

Edited by s1guy

Share this post


Link to post
Share on other sites

heres 2 pics,,,my magnaflow is 6in round,,18 in long,,,hope this helps,,,bolted right up fr me,,but magna flow sells this muffler in a lot of sizes,,,it sounds really good,,,trying to upload pics,,,no dice,,,arrrghhh,,

Share this post


Link to post
Share on other sites

post-6428-0-30385300-1362921798.jpg still having probs uploading pics                                                                                                          

Edited by s1guy

Share this post


Link to post
Share on other sites

Thanks Ken, think I'll do something very similar. Do you remember the muffler part#? Or if you can give me the dimensions I can look it up.

Share this post


Link to post
Share on other sites

pretty sure mine is 6in diameter,18 in long,,,i just measured my old muffler and ordered the same size,,bolted right up,,cant remember the part num,replaced it a couple years ago,

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×