free hit
counters
ABS Pressure Switch Fitting/Adaptor - Suspension/Brakes/Wheels/Hubs/Steering/Geo - The Lotus Forums Jump to content
Sign in to follow this  
Pete_Inno

ABS Pressure Switch Fitting/Adaptor

Recommended Posts

Greetings,

 

I'm having problems locating an adaptor/fitting to accomodate my new pressure switch. I can get 14 x 1.5 male to 1/4 npt adaptors all day long. The problem is that the male section is not long enough, only about 7/16". I need about 5/8" to fully thread into the port. I can't seem to find one anywhere. Does anyone know of a source for this adaptor? 

 

Thanks,

 

Pete

94 S4

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

Any decent hose specialists should be able to.get what you need, what switch are you using now?

Share this post


Link to post
Share on other sites

I used a  "14mm metric male bulkhead with locknut" part no MBH14-14 from http://www.cotswoldengineeringsupplies.co.uk

 

This has a very long M14 thread at one end which you can cut to any length you want, you will then finish up with a standard M14 male to connect to.

 

I screwed it in until it bottomed with a thick copper washer and then cut off enough to leave a clearance.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×