free hit
counters
SJ 104 MOP GREEN DOT PULLEYS - Engine/Ancilliaries - The Lotus Forums Jump to content
Sign in to follow this  
giorgio67

SJ 104 MOP GREEN DOT PULLEYS

Recommended Posts

Hi ,

I've bought two 104 green dot pulleys from SJ, these are not original Lotus pulleys so they came with only one side marked and with a yellow and a white dot on a side.

So, I think the correct way to timing is to allign the two yellow dot on IN-EX side as there is not the opposite mark on the other side and there is not the raised bump on any side.

What the sense of the white marks seeing that the pulley can not be inverted?

Does anyone have fitted the SJ pulleys so I can be sure about that?

I will check obviously the piston N.1 position but I'd like to have some feedback on them .

Thanks

Giorgio

post-3419-0-84260300-1367666231.jpg

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

Compare the new pulleys with the old ones...make sure the woodruff key slots are aligned...then you can see which dots are for what!! If you have the old ones laying flat on a piece of paper and mark the paper where the timing dot is, then align the new pulley by laying it on top if the old one and getting the woodruff keyways aligned, then the thing should become clear!! Have fun, chum (!) 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×