iceberg Posted August 25, 2013 Report Share Posted August 25, 2013 Hi all, Does anyone know what size rivet is used to hold the backing plates in the light pods? Åke Quote Link to comment Share on other sites More sharing options...
iceberg Posted August 29, 2013 Author Report Share Posted August 29, 2013 Nobody??? Quote Link to comment Share on other sites More sharing options...
mc21.8 Posted August 29, 2013 Report Share Posted August 29, 2013 1/8 i think but cant remember tbh 23 yrs ago !!, but think you use washers as well inside pods Quote Link to comment Share on other sites More sharing options...
fjmuurling Posted August 29, 2013 Report Share Posted August 29, 2013 The washer A075W4062F is a Washer 5/32 x 3/8 x 21G, (googled the partnumber) which converts into 4 x 9.5 x 0.8 mm which is a standard size M4 washer. The Pop Rivet A075W6069F (=A075W6069Z) is a (googled etc.) 5/32x .37 sized Pop Rivet. conversion into metric gives 4 x 9.4 mm. So the rivet is 4 x 10 mm. Maybe a better solution is to use (if enough space) M4 buttonhead screws in combination with a washer and a nyloc nut all made from stainless steel. Below a link for converting the G(auge dimensions) http://en.wikipedia.org/wiki/Standard_wire_gauge Quote Esprit Freak Link to comment Share on other sites More sharing options...
iceberg Posted August 30, 2013 Author Report Share Posted August 30, 2013 Thanks Freek! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.