espritmania 28 Report post Posted October 17, 2013 Hi,about to put the roll pins in the drive shafts.Are they fitted individually or do you tap them in complete.Cheers. Quote Share this post Link to post Share on other sites
cjtpb13 11 1 Vehicles Report post Posted October 17, 2013 I installed individually. Remember to have the split in the pin 180* from one another and a dab of silicone at each end Quote Share this post Link to post Share on other sites
Vulcan Grey 248 1 Vehicles Report post Posted October 17, 2013 Make sure the axles are aligned, they don't work if 180deg from the original orientation. Tap the larger pin in a bit with the slit perpendicular to the axis of the shaft, then tap the smaller pin in with the slit 180 deg from the slit of the larger pin. Then tap them home. Quote Travis Vulcan Grey 89SE My Lotus Photo and Projects Album Share this post Link to post Share on other sites
espritmania 28 Report post Posted October 17, 2013 Thanks. Quote Share this post Link to post Share on other sites
Techspy 22 Report post Posted November 27, 2013 Anyone know what sizes they are? Is this something I can get at the parts store or are they specialized? Thanks Quote John 94 S4 Share this post Link to post Share on other sites
Vulcan Grey 248 1 Vehicles Report post Posted November 27, 2013 Metric, tough top get locally... can't remember the sizes Quote Travis Vulcan Grey 89SE My Lotus Photo and Projects Album Share this post Link to post Share on other sites
