MarkKassim Posted December 3, 2013 Report Share Posted December 3, 2013 Another chance to buy the 321 Stainless Steel manifold upgrade from Alunox. This is our 3rd group buy and just to recap on the history of the product. It was developed by Alunox who are a well established engineering company that supply the motorsport industry with tailor made high end exhaust systems, made of exotic materials such as Inconel, titanium and 321 Stainless Steel etc. Alunox took on the job of redesigning the original cast manifold for the Esprit due to its failure rate. But also were able to offer uprated performance using their expertise in this area. The manifold is constructed from 321 Stainless Steel, precision TIG welded in dedicated jigs giving a fracture proof construction. The flanges are laser cut out of Stainless Steel to give an accurate fit, the collector uses burns double slip joints to allow movement during the heat cycle whilst being supported by the pivoting brace mounted directly under the turbo. The downpipes are all equal length mandrel bent tubes to maximise flow arranged to fit within the space available. Even at normal driving speeds the exhaust gas temperatures are typically 750 to 850 °C and greater during track use. The manifold has been proven to withstand all the temperatures and conditions produced by the Esprit. The manifold is also lighter than the original cast unit weighing only 6 Kg. All these attributes produce a durable high quality product with gains in both power and torque and lag reduction. It has been dyno tested as seen in the video below on a highly modified Esprit running at 424 BHP and 409 lf.ft torque. http://youtu.be/a2E7w68v-p8 Further in-depth technical info on this can be found on Dave Changes thread http://www.thelotusforums.com/forums/topic/55155-exhaust-manifold-design-test-result/ It has also been track tested and driven hard without fail. Look for feedback on the forum about performance gains. The kit also includes all gaskets, stainless steel nuts and studs and brace. The turbo flange can be changed to accommodate different turbos, as can the collector be made to order. These adjustments are at extra cost and can be discussed with Leon at Alunox. The manifold comes with 2 year warrantee, this does not cover fitting and shipping. The normal one off price is £1150 + VAT. The group buy price £1000 + VAT + Shipping, for 10 off I will put up shipping costs later In addition to this there is also a stainless steel K nut option for the manifold head studs. This is an alternative to the Lotus locking tab washers. This option is about £35. I will post later if anybody's interested. If you want to take advantage of this offer sign up below and I’ll add you to the list. Thanks, Mark Quote Link to comment Share on other sites More sharing options...
jackettc Posted January 24, 2014 Report Share Posted January 24, 2014 Got my old manifold off, ready for this new one so I'm in ! Any rough ideas on dates / deposits as my car will be sorted and ready to go mid Feb 2014 ? Quote Link to comment Share on other sites More sharing options...
MarkKassim Posted January 28, 2014 Author Report Share Posted January 28, 2014 Hi Chris, looks like your the first ,we will need some interest to get it going 1) Spud We normally take deposits when have the 10 Thanks, Mark Quote Link to comment Share on other sites More sharing options...
CarlC Posted February 26, 2014 Report Share Posted February 26, 2014 1) Spud 2) CarlC Quote Link to comment Share on other sites More sharing options...
Jacques Posted February 26, 2014 Report Share Posted February 26, 2014 Question: Are the tubes on this specific manifold so big, that they will sit so near the frame, that it will burn off the galvanisation? Or is there enough spare? Cheers, redfox. Quote Nobody does it better - than Lotus Link to comment Share on other sites More sharing options...
MarkKassim Posted February 27, 2014 Author Report Share Posted February 27, 2014 Hi Redfox, they're not that close, I've been running one for about 3 years now without a problem . Mark k Quote Link to comment Share on other sites More sharing options...
The Pits Posted February 27, 2014 Report Share Posted February 27, 2014 Does it fit the Giugiaro cars? Quote Link to comment Share on other sites More sharing options...
Bibs Posted February 27, 2014 Report Share Posted February 27, 2014 Not with your turbo, you've had to change to one with an integral wastegate. Quote 88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport Evora NA For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. Link to comment Share on other sites More sharing options...
Trevsked Posted February 27, 2014 Report Share Posted February 27, 2014 No it's for the later cars with integral wastegate and actuator. You can as I did change to the later manifold (and indeed this one) if you also buy a new turbo and actuator. then it bolts on but you will also need to T in to the water for the cooling on the turbo and a retur in to your header tank. Trevor. Quote I'll get around to it at some point. Link to comment Share on other sites More sharing options...
The Pits Posted February 27, 2014 Report Share Posted February 27, 2014 In that case, I wish Alunox the very best of luck for the future but I'm not going to invest. I'm out. Quote Link to comment Share on other sites More sharing options...
pete Posted February 27, 2014 Report Share Posted February 27, 2014 No it's for the later cars with integral wastegate and actuator. You can as I did change to the later manifold (and indeed this one) if you also buy a new turbo and actuator. then it bolts on but you will also need to T in to the water for the cooling on the turbo and a retur in to your header tank. Trevor. you only need the water connection if you go chargecooled.You can use a turbo with integral wastegate but not watercooled Quote hindsight: the science that is never wrong Link to comment Share on other sites More sharing options...
Bibs Posted February 27, 2014 Report Share Posted February 27, 2014 The water cooling is to help it cool after the engine is switched off, seems like a good idea to me! Quote 88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport Evora NA For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. Link to comment Share on other sites More sharing options...
Trevsked Posted February 27, 2014 Report Share Posted February 27, 2014 Pete, The water cooling is nothing to do with the charge cooler, they are separate. Trevor. Quote I'll get around to it at some point. Link to comment Share on other sites More sharing options...
pete Posted February 27, 2014 Report Share Posted February 27, 2014 oh! Quote hindsight: the science that is never wrong Link to comment Share on other sites More sharing options...
Eken Posted April 14, 2014 Report Share Posted April 14, 2014 Mark, Have you thought about posting on Lotus talk and Yahoo Turbo Esprit. It may generate more takers. Count me in. 1) Spud 2) CarlC 3) Ed Quote Link to comment Share on other sites More sharing options...
MarkKassim Posted April 21, 2014 Author Report Share Posted April 21, 2014 Hi Ed, thanks, are you on Lotus Talk, if so could you post and I can you photos . Mark Quote Link to comment Share on other sites More sharing options...
Eken Posted May 7, 2014 Report Share Posted May 7, 2014 Mark, I posted the link on Lotus Talk. Ed Quote Link to comment Share on other sites More sharing options...
MarkKassim Posted May 19, 2014 Author Report Share Posted May 19, 2014 For those of you interested , check out the Bac Mono on Lotus Talk , have a look at the badge on the manifold http://www.lotustalk.com/forums/f195/s111-bac-mono-update-thread-122156/ Look familiar Mark Quote Link to comment Share on other sites More sharing options...
cammmy Posted June 1, 2014 Report Share Posted June 1, 2014 Hi Guys I've just purchased an Esprit GT3 with a cracked manifold. Just wondering if there was another group buy for these manifolds in the pipeline? Thanks Cam Quote Link to comment Share on other sites More sharing options...
MarkKassim Posted June 1, 2014 Author Report Share Posted June 1, 2014 Hi Cam , its the same manifold as this one. I sure we have some GT3's who may have fitted from previous group buys. Mark K Quote Link to comment Share on other sites More sharing options...
cammmy Posted June 2, 2014 Report Share Posted June 2, 2014 Brilliant, thanks. Just wondering if there is another group buy planned soon or if i'll need to purchase a one off from Alunox? Quote Link to comment Share on other sites More sharing options...
MarkKassim Posted June 2, 2014 Author Report Share Posted June 2, 2014 Hi Cam, this one running at the moment, once we reach 10 I will arrange for people to pay Alunox , and production will begin. Do you want me to add you to the list. Mark Quote Link to comment Share on other sites More sharing options...
cammmy Posted June 2, 2014 Report Share Posted June 2, 2014 Thanks Mark. How many are currently in? 3? I'm looking to get one pretty soon as I'm worried about rusty bits going through the turbine as well as any air leaks possibly causing the ECU to over enrich and cause bore wash. Quote Link to comment Share on other sites More sharing options...
Bosse Posted June 3, 2014 Report Share Posted June 3, 2014 Hi Mark My manifold is cracked so I'm in for one. Quote Link to comment Share on other sites More sharing options...
MarkKassim Posted June 3, 2014 Author Report Share Posted June 3, 2014 Hi Bosse, no problem 1) Spud 2) CarlC 3) Ed 4) Bosse Mark K Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.