dixi4uk Posted January 7, 2015 Report Share Posted January 7, 2015 I think it is also a belt an braces approach, having the throttle stick open due to a single spring failure could be quite nasty. My sentiments entirely. You have stated exactly my opinion on the return spring unless of course a twin throttle cable set up is fitted which have the springs built in. Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 7, 2015 Author Report Share Posted January 7, 2015 Fair enough I'll get a new spring installed. Don't know why it never had one but for added security I'll get another. Quote Link to comment Share on other sites More sharing options...
Gold FFM johnpwalsh Posted January 7, 2015 Gold FFM Report Share Posted January 7, 2015 I recon the comment proves the point Dave, get her out on the dry and give her a good bloody blast, it will do her the world of good. I once had a Toyota high lux petrol which hag done 42k miles before i bought her and never been out of Aberdeen city. I had to take her Manchester, by the time I got to Dundee some 90 odd miles I was ready to turn round and go home, by the time I reached Glasgow I could get up a small hill without having to change down. With the foot planted firmly on the floor and continually filling the fuel tank I reached Manchester with a motor that was now singing, burned off all the carbon, blew the shit out of the system and probably extended her life for a couple of years. If she had stayed as she was she would probably been scraped as having a duff engine. Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 10, 2015 Author Report Share Posted January 10, 2015 Carpets, carpets, and more carpets! Had to wait for some adhesive to arrive which took an age to appear, anyway it came this morning and I was able to continue with my carpets install. Don't expect to see the whokr thing done in one post, no, no, I will be taking my time and going one piece at a time. So I've tackeled probably the most difficult piece this morning, the door surround. I'd had already cut a template and cut the real carpet, I wanted to do this piece in one hit rather than the hundreds of flappy bits that the previous owner had attempted. So slowly I press this piece into place and apply adhesive. I have to say the glue I found is excellent, once down it practically bonds to the grp, to remove it you'd literally rip it to shreds trying. Anyway have a look at the photos, seems to have gone down well. This is going to be a slowish process, I'll update the thread as and when I have more photos. On a side note, I've made some test attempts at 'brushed' aluminium external trim pieces and I think my tests are a good to go, I'll post a photo later. Cheers, Charlie ;-) 1 Quote Link to comment Share on other sites More sharing options...
Gold FFM johnpwalsh Posted January 10, 2015 Gold FFM Report Share Posted January 10, 2015 Nice job Charlie, you will be getting offer for a refit soon. 1 Quote Link to comment Share on other sites More sharing options...
directordanw Posted January 10, 2015 Report Share Posted January 10, 2015 I'm going to have to tackle my carpets at some point. Did you glue the spacers back under the carpet for the seat to mount on? Or are you going to have them above the carpet which probably gives a smoother finish? 1 Quote Regular restorer. Rather less reliable forum poster! Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 10, 2015 Author Report Share Posted January 10, 2015 Above the carpet, although that custom made piece is removable I think they should go above to keep it clean, not that you'll ever see them! Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 10, 2015 Author Report Share Posted January 10, 2015 I've always admired the brushed stainless steel look (delorean comes to mind) and had at the back of my mind that this look would suit the exterior aluminium trim on the Elite. So I had a few extra pieces laying around and thought I'd test the theory and my efforts are encouraging and I think I'm going to see this through. It's not hard to create the effect but takes a lot of elbow grease, trick is to go in straight lines (sand paper) and keep going until you achieve a consistent effect. Quote Link to comment Share on other sites More sharing options...
dixi4uk Posted January 10, 2015 Report Share Posted January 10, 2015 Dans' post regarding the spacers being under the carpet, or above, provokes the thought why were they positioned under the carpet originally? Is it some clearance reason? As I have the original carpets as a patten, albeit falling apart, I will eventually cut new ones to the original but the spacers puzzle me as they were glued down to the fibreglass. By the way please tell me the brand of glue for future ref. I was looking in B&Q but their own brand of carpet glue seemed too cheap to be any good. Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 10, 2015 Author Report Share Posted January 10, 2015 This is the adhesive I used, honestly this stuff sticks hard, I also did the roof lining with it. It kind of creates a permanent bond, I've tried to pull pieces apart (when I've done it wrong) and it practically ripped the carpets to shreds in the process, it's good stuff! http://m.ebay.co.uk/itm/161193501810?nav=SEARCH 1 Quote Link to comment Share on other sites More sharing options...
dixi4uk Posted January 10, 2015 Report Share Posted January 10, 2015 Thanks for the heads up on the glue you used. It is pretty much the same price as the B&Q stuff and free delivery. Personal recommendation always pays in the long run. I will get some ordered ready for my retrimming. Doing a great job on the outside trims. If your not pleased with the Delorien look you can always try the vinyl wrap. Regards, Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 11, 2015 Author Report Share Posted January 11, 2015 Couple more photos as the install develops, I'm gunna need another 2sqm of carpet as I've balls'd up a piece or two :-S Quote Link to comment Share on other sites More sharing options...
esprit s2 Posted January 11, 2015 Report Share Posted January 11, 2015 Looks really good Charlie. If I get time tonight I'll post a picture of my carpet set that I have to fit, you might be able to tell me which bit goes where! 1 Quote Link to comment Share on other sites More sharing options...
mikeeech Posted January 11, 2015 Report Share Posted January 11, 2015 I love the light colour of the carpet. It lifts the inside. A really good job there. 1 Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 17, 2015 Author Report Share Posted January 17, 2015 Loads of photos today, practically finished off the carpets this morning and I'm over the moon with how they look, I also trial fitted one front seat, and just how cool does that look?! The car is now so close to my original idea of a red exterior and original cream intetior which I thought would look spot on there's not much more left to do on it other than bolt it all down, I hasten to add the photos above show everything in lose fit mode. Just the rear quarters to recover and the interior is complete. All the best, enjoy the photos, Charlie :-) 1 Quote Link to comment Share on other sites More sharing options...
dixi4uk Posted January 17, 2015 Report Share Posted January 17, 2015 A job well done. The carpet fit is just amazing.your eye for detail is brilliant. I am sure you are proud of your achievement. When you actually mount the seats. Where are you placing the thick washers, under the carpet as original or on top? What if anything would be the difference? I would be interested to know. 1 Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 17, 2015 Author Report Share Posted January 17, 2015 Well as was convinced they should go on top but you can see why lotus put them under the carpets, they are hidden. If you go above the carpet they stick out a touch and look crap. So mine have gone underneath and are staying there. Regarding the fit, it's all about templates and trial fitting, you guys tend to only see my finish job, but believe me I've made mistakes and have done one or two piece twice. To my big surprise the piece around the steering column was a one hit fit, got lucky with that piece cos' that is by far the most tricky piece to cut and fit. Quote Link to comment Share on other sites More sharing options...
dixi4uk Posted January 17, 2015 Report Share Posted January 17, 2015 I must admit the photo of the carpet fit around the column is impressive. I thnk you have the right idea regarding the thick washers being under the carpet much neater out of sight. Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 18, 2015 Author Report Share Posted January 18, 2015 Front seats now permanently installed, just the rear quarters to go and the interior will be complete. Quote Link to comment Share on other sites More sharing options...
dixi4uk Posted January 18, 2015 Report Share Posted January 18, 2015 What's the next project? I feel I will be denied my daily fix. Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 18, 2015 Author Report Share Posted January 18, 2015 Haha, this is far from finished, love this car and I'm not going to give it up easy. I've always had a 3 phase plan for this elite, I'm at phase 1 really, get it straight, lowered and presentable. Phase 2 - maybe a respray. Phase 3 - V8 power. All depends on time and money, for now phase 1 is more than sufficient. All the best Charlie :-) Quote Link to comment Share on other sites More sharing options...
soldave Posted January 18, 2015 Report Share Posted January 18, 2015 (edited) Haha, this is far from finished, love this car and I'm not going to give it up easy. I've always had a 3 phase plan for this elite, I'm at phase 1 really, get it straight, lowered and presentable. Phase 2 - maybe a respray. Phase 3 - V8 power. All depends on time and money, for now phase 1 is more than sufficient. All the best Charlie :-) I spent 10 years in Japan and am much more of a turbo guy. RB26 swap and a big T88 turbo (or 4G63 and Holset HX-40 turbo, as was my preference) in there will raise some eyebrows Looking great, by the way You mentioned early in the thread you knew quite a few cleaning tricks. Fancy sharing any of them? You've got the interior, and especially the steering wheel, popping. Edited January 18, 2015 by soldave Quote Link to comment Share on other sites More sharing options...
CharlieCroker Posted January 19, 2015 Author Report Share Posted January 19, 2015 @soldave, in all honesty the photos make them look better than they really are but my techniques are simple, I use well worn brillo pads to lightly remove the very top dirt with a touch of fairly liquid, loads of water don't let it go dry. Once all the grime is away I then use white spirit on any stubborn dirt marks, this doesn't always work but white spirit is excellent for removing oil based scuffs. Thats it, just old fashioned elbow grease. Regarding the leather steering I used the same technique for cleaning it but used leather soap and leather food to bring it back to life. I also recoloured it with black shoe die after cleaning it then applied the food on top. Quote Link to comment Share on other sites More sharing options...
dixi4uk Posted January 19, 2015 Report Share Posted January 19, 2015 @soldave, in all honesty the photos make them look better than they really are but my techniques are simple, I use well worn brillo pads to lightly remove the very top dirt with a touch of fairly liquid, loads of water don't let it go dry. Once all the grime is away I then use white spirit on any stubborn dirt marks, this doesn't always work but white spirit is excellent for removing oil based scuffs. Thats it, just old fashioned elbow grease. Regarding the leather steering I used the same technique for cleaning it but used leather soap and leather food to bring it back to life. I also recoloured it with black shoe die after cleaning it then applied the food on top. I had success on the steering wheel with black leather balm. Purchased from a local shoe repairers for £6.00.in a glass jar. My steering wheel leather was dry and had multiple cracks in the surface. I thought it had had it really but after three treatments over a couple of days the result was amazing. A supple jet black steering wheel revived beyond all expectations. Quote Link to comment Share on other sites More sharing options...
soldave Posted January 19, 2015 Report Share Posted January 19, 2015 Thanks for that. Mine's in pretty good nick but a bit of extra bling is always nice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.