Guest shagatsea30 Posted June 6, 2005 Report Share Posted June 6, 2005 I have noticed that my fuel injector,squirt out in a solid stream about 4 feet long I am thinking that the fuel pressure at the fuel rail is too high. Could someone tell me what the fuel rail pressure should be with the ignition switch on,and the engine not running. also what should the fuel pump pressure be. Quote Link to post Share on other sites
karmavore 2 Posted June 6, 2005 Report Share Posted June 6, 2005 3 bar / 43.5 psi Quote Luke Colorado, Super Spy. - Lotus Owner No Longer 1987 Zender Widebody 560SEC | 1994 Lotus Esprit S4 | 2013 Honda Fit EV (#269) Link to post Share on other sites
scoule 0 Posted June 6, 2005 Report Share Posted June 6, 2005 I have noticed that my fuel injector,squirt out in a solid stream about 4 feet long I am thinking that the fuel pressure at the fuel rail is too high. Could someone tell me what the fuel rail pressure should be with the ignition switch on,and the engine not running. also what should the fuel pump pressure be. <{POST_SNAPBACK}> Isn't this a symptom of injectors that need to be ultrasonically cleaned? Quote Link to post Share on other sites
CNH 0 Posted June 6, 2005 Report Share Posted June 6, 2005 Isn't this a symptom of injectors that need to be ultrasonically cleaned? <{POST_SNAPBACK}> I would think that they should spray instead of stream Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.