MGFCrasher Posted November 12, 2006 Report Share Posted November 12, 2006 Just got into the 350 after not using it for a weeks and it wouldnt start.The batt was a bit flat so I,ve charged it,but still wouldnt run.It would start for a second and then die. Plugged the gendan thing in and its flashed up 3 codes.I reset them and now it runs fine !!! The question is has anyone else had experience of these codes and what were the causes??; P0154 - This always happens and is bank 2 sensor 1 o2.I,m not running cats and it confuses the sensors.A quick reset and no problem with this one. P1101 - This is Manufacturer control fuel air metering , never had this before!! P0507 - Idle control system RPM high , never had this before although thre RPM does generally hovver over 1000. I suspect they are all one offs because the battery was a bit flat etc but any comments would be appreciated. Quote Link to comment Share on other sites More sharing options...
gmendoza Posted November 13, 2006 Report Share Posted November 13, 2006 I'm not sure why the car won't idle but the other day my battery died while I was working on the car. After I charged it and started the car I got a P1101 code. I deleted it and never came back. Quote '03.5 Final Edition Esprit ~ 5.7lbs/hp mildly modded - 430rwhp, 353rwtq Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.