Don.Hasi 46 4 Vehicles Report post Posted November 24, 2014 i have problems to identify the right panel filter: http://www.ebay.de/itm/400695612529?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT or http://www.ebay.de/itm/400695612641?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT ? Most seller claim the wrong MY because of the Eclat-Excel-thingie and different engines... Do we have one with the metal on the back or not? I know my SE has one... but I dont know which is the right one for the Eclat S2.2? Every quick help is much appreciated Quote Share this post Link to post Share on other sites
Dunc 371 4 Vehicles Report post Posted November 24, 2014 I thought they were the same? Airbox looks the same on both my cars. (eclat vs excel) Quote Share this post Link to post Share on other sites
Pau lito 6 Report post Posted November 24, 2014 Im Esprit passen beide. Du musst den alten Dichtungsgummi wieder verwenden. 2784 ist wie mein Orginalfilter, 2011 ist das Nachfolgemodel. Quote Share this post Link to post Share on other sites
Don.Hasi 46 4 Vehicles Report post Posted November 24, 2014 Also ich hätte gedacht, dass nicht nur aufgrund der Serienentwicklung bei Lotus sondern demgemäß auch bei k&n der 2784 nach dem 2011 gekommen wäre. K&N selber schränkt dies nicht auf einen Motor, sondern rein über das Baujahr ein, welches gleichbedeutend mit der Einführung des SE war... Hast Du denn selber den 2011 schon einmal bei Dir probiert, Kay? Mysterious.... Like Dunc says.... There has been only one part number all the time for the air filter element. So why does k&n do 2?? Quote Share this post Link to post Share on other sites
Pau lito 6 Report post Posted November 25, 2014 Hallo Don, ich habe vor kurzem den 2784 bei mir eingebaut. Das der 2011 passt habe ich mehrmals hier im Forum gefunden und z.B. dieser KN-Webshop gibt das auch an. Quote Share this post Link to post Share on other sites
andydclements 418 2 Vehicles Report post Posted November 25, 2014 Mysterious.... Like Dunc says.... There has been only one part number all the time for the air filter element. So why does k&n do 2?? I believe the steel backplate is a design patent and so K&N moved to the non-steel design. Quote Share this post Link to post Share on other sites