free hit
counters
Project - S1 re-trim - Page 5 - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC - The Lotus Forums Jump to content


Recommended Posts

Thanks Paul, that makes sense. Probably M5 should do it.

Has anyone got any pictures of the boot boards? In particular where do the small steel angle brackets for the rear boards go? How is the large central board that goes around the battery secured?

Paul, with the 1/4 inch felt on the central tunnel how did you get rid of the Bump in the carpet where the throttle cable and speedo cable go? I have half inch felt on there but will have to reduce it as the trim is too tight.

Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.
  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I bought the foil off ebay, cut to size and stuck on with high temperature glue..   this is what I used: http://www.ebay.co.uk/itm/Exhaust-Turbo-Heat-Shield-Aluminised-Barrier-Mat-1m-x-500mm-New-/2

Hi Jon,      For what it's worth, when I covered the inside of one of my engine covers, I used bonnet insulation from a Porsche 928.   I chose it because I know it can withstand the heat, and the ad

This isn't Nextel!

Posted Images

Yes I think M5 is correct.

 

Sounds like your battery is sunk into the floor in the boot? If so, I can't help you as the early cars were different.

 

I didn't get rid of the bulge and I think you will see it on every car? If I was doing it again I'd re-route the speedo cable over the top of the tunnel rather than having it go down the side.

Lotus Esprit [meaning] a 1:1 scale Airfix kit with a propensity to catch fire

Link to post
Share on other sites
  • 1 month later...

Going back to the Nextel portion of this thread, I want to add this data point:

https://youtu.be/Us0QiQ0drXw?t=3m15s

This is a "Federal-spec" car, no clue whether originally sold in Japan or exported there from North America.  But this is the most intact original suede/flocking/nextel/whateveryouwanttocallit that I have seen on the internet.   Not sure if the early (UK Domestic) S1s had this or something different, but this is what I remember and am used to seeing the original fuzzy covering on the tartan cars looking like.  On the other hand, this looks like it might be fabric and not sprayed on?   Can't tell, and can't tell whether it is original or a very dedicated attempt to look like the original stuff.  Might be worth it to reach out to the owner and ask for some close up photos?

 

- Tony K

Edited by Tony K

Tony K. :)

 

Esprit S1s #355H & 454H

Esprit S2.2  #324J

1991 Esprit SE

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...