free hit
counters
88 turbo speedo cable run - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC - The Lotus Forums Jump to content
Sign in to follow this  
benjamincalleja

88 turbo speedo cable run

Recommended Posts

Hey peeps, i need to replace my speedo cable (and possibly have my speedo reconditioned by JDO if it doesnt end up being the cable) due to a bouncy needle....when the new two part cable arrives (mine was single piece) how do i install it, i cant seem to find a guide.  Where does it run after the binnacle, do i need to take the interior apart or remove the engine?

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

Seem to remember that it wasnt too bad a job on my 88 Carb Turbo. The join is at the bottom of the wooden engine board behind drivers seat. So after unscrewing one piece cable from the speedo I simply tied the new piece with the speedo connection to the old cable and pulled it through. You then connect the other part of the cable and that easily connects back into the gearbox.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...