free hit
counters
Turbocharger part numbers - Page 3 - Induction/Turbo/Chargecooler/Manifold/Exhaust - The Lotus Forums Jump to content

Recommended Posts

Bob,

Trust, but verify... LOL

0.42 a/r compressor is 60 trim on s4s and 55 trim on s4.

 

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

The 0.63 AR turbine housing was used on the '80 to '92 models with the external wastegate.

Share this post


Link to post
Share on other sites
On 16/03/2019 at 07:57, sailorbob said:

The 0.63 AR turbine housing was used on the '80 to '92 models with the external wastegate.

Correct!

From 1980-88, Lotus used the Garrett T3 turbocharger. It has, turbine  .63 a/r,1.80 inducer (46mm), & compressor: .42 a/r, 1.72 inducer

Here is the info you were looking for direct from Mr.Esprit :-
The Turbocharger on the USA Turbos with Bosch K Injection (86, 87 & 88)

are Garrett T3, Lotus Part No. C910E6372F (Listed in Lotus Parts Book)
Specification as follows :-
0.63 A/R Turbine, 1.90” turbine exducer,
0.42 A/R,  1.72” compressor inducer
55 Trim Comp Wheel

 

S300 turbo PN# 452106-1

 

.

Share this post


Link to post
Share on other sites

These are the specifications I found for the C910E6372F turbine wheel; inducer dia. 59.03 ± 0.127 mm, exducer dia. 45.72 ± 0.127 mm, tip height 9.779 ± 0.127 mm, blades 11, 60 trim, journal bearing dia. 10.1498 - 10.1575  mm, stem dia. 6.3398 - 6.3475 mm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...