Clutch release Bearing

[82turbo]

All

I have the gearbox out of the car and have soaked the release bearing trying to remove it.

I have pulled the fork out of the gearbox so it is not in the way - the manual does not show a circlip or anything, apparently it should just pull out.

Can anyone confirm this.

Thanks

Paul

[iainskea]

1. pull the spring lug back against the return spring and remove the adjuster taking care not to lose the push rod

2. Remove the lever gromet

3. Release the split pin securing the fork to the ball pivot and remove the clip retaining the release bearing to the fork. Remove the fork.

4. Slide the release bearing of the transmission shaft.

Hope it helps,

Iain

Edited January 13, 2007 by iainskea