DaveS4s Posted September 22, 2016 Report Share Posted September 22, 2016 Just received my manifold today, LOVE IT, Now that brings up some questions, (1) wrap it , (2) powder coat it , or (3) leave it the hell alone????. Also is there some instructions for the install?? I know that it is basically pull off the old and put on the new, but what about the LINK ROD and the adjustment??? Quote Link to comment Share on other sites More sharing options...
DJ Bob Posted September 23, 2016 Report Share Posted September 23, 2016 Am I the only person having issues with US customs? My exhaust has been stalled in Louisville for 2 days now. Quote Link to comment Share on other sites More sharing options...
jime Posted September 23, 2016 Report Share Posted September 23, 2016 So mine shipped out Wednesday, 9/21/16, went to Philadelphia, PA awaiting clearing agency review, then arrived in the local hub yesterday (10 miles from my house). It showed that the receiver must pay duties or taxes, but no idea the amount. Then last night the package shipped back to Philadelphia, PA then to Stratford, Ct, then to Windsor Locks, CT, then back to Massachusetts and now it shows out for delivery with no further mention of any amount due upon delivery. I imagine I will just get a bill from UPS in a week or so. Quote Link to comment Share on other sites More sharing options...
Htown Posted September 23, 2016 Report Share Posted September 23, 2016 Mine showed up yesterday in good shape. No bill at drop off, but I guess we will see if I receive one. Quote "Firearms stand next in importance to the Constitution itself. They are the American people’s liberty teeth and keystone under independence." - George Washington Link to comment Share on other sites More sharing options...
DJ Bob Posted September 23, 2016 Report Share Posted September 23, 2016 I called UPS and was told customs has my package on hold cause they needed my SSAN number. Has anyone else had this problem, and if not why am I the only one? Quote Link to comment Share on other sites More sharing options...
Zig Posted September 23, 2016 Report Share Posted September 23, 2016 (edited) This is exactly what I always face with UPS.... They use their own branch (UNITED PARCEL SVC. 1930 Bishop Lane Suite 200 Louisville-KY 502-485-2222) as "customs clearing house" and charge you $38.88 for filing a single statement page for US customs and then collect "well deserved fee" from you... If you call them and give them tracking number you can give them credit card number and clear it. They will deliver the package 1 day later, otherwise driver will demand a Money Order or Check, because driver does not accept cash or credit cards. =================================================================================================== UNITED PARCEL SVC 1930 Bishop Lane Suite 200 Louisville-KY 502-485-2222 Thursday, September 22, 2016 Status: Accepted Account/CPP Number(s): 7US2EFAV00 Account/CPP Name(s): G Account/CPP Name(s): Zig Merchant#: 00000033648 Card#: XXXX XXXX XXXX XXXX Card Type: Master Card Auth#: 39294P Total Transaction Amount: 38.88 Invoice Number(s): Invoice Amount(s): 3Y975FVFJGW 38.88 Edited September 23, 2016 by Zig Quote Link to comment Share on other sites More sharing options...
DJ Bob Posted September 23, 2016 Report Share Posted September 23, 2016 I got a call from UPS. They said customs required a tax ID or SSAN from me because the value is listed as $2,500. Apparently anything above $2,300 puts you in a different tax bracket. However, it's been cleared from hold and is now scheduled for delivery on Monday. We'll see Quote Link to comment Share on other sites More sharing options...
jime Posted September 23, 2016 Report Share Posted September 23, 2016 Mine got delivered today, and yes I had to give the UPS guy a check for $38.88. Quote Link to comment Share on other sites More sharing options...
Htown Posted September 23, 2016 Report Share Posted September 23, 2016 3 hours ago, Zig said: This is exactly what I always face with UPS.... They use their own branch (UNITED PARCEL SVC. 1930 Bishop Lane Suite 200 Louisville-KY 502-485-2222) as "customs clearing house" and charge you $38.88 for filing a single statement page for US customs and then collect "well deserved fee" from you... If you call them and give them tracking number you can give them credit card number and clear it. They will deliver the package 1 day later, otherwise driver will demand a Money Order or Check, because driver does not accept cash or credit cards. =================================================================================================== UNITED PARCEL SVC 1930 Bishop Lane Suite 200 Louisville-KY 502-485-2222 Thursday, September 22, 2016 Status: Accepted Account/CPP Number(s): 7US2EFAV00 Account/CPP Name(s): G Account/CPP Name(s): Zig Merchant#: 00000033648 Card#: XXXX XXXX XXXX XXXX Card Type: Master Card Auth#: 39294P Total Transaction Amount: 38.88 Invoice Number(s): Invoice Amount(s): 3Y975FVFJGW 38.88 I was not asked for anything at drop off from UPS. manifold only though.... Quote "Firearms stand next in importance to the Constitution itself. They are the American people’s liberty teeth and keystone under independence." - George Washington Link to comment Share on other sites More sharing options...
DJ Bob Posted September 23, 2016 Report Share Posted September 23, 2016 UPS is charging me $118.09 !! WTF? Quote Link to comment Share on other sites More sharing options...
Zig Posted September 23, 2016 Report Share Posted September 23, 2016 Did you order the whole exhaust system or just a header? For header you would do $38.88 donation only. The whole system is another ball of wax... Quote Link to comment Share on other sites More sharing options...
DJ Bob Posted September 23, 2016 Report Share Posted September 23, 2016 11 minutes ago, Zig said: Did you order the whole exhaust system or just a header? I ordered standard 2 1/2" system up to the turbo, without a CAT. I'm keeping the existing muffler/silencer. Leon put the value of my shipment at $2,500 which put me into a different category than everyone else. Why? Quote Link to comment Share on other sites More sharing options...
Htown Posted September 23, 2016 Report Share Posted September 23, 2016 On 9/22/2016 at 14:10, DaveS4s said: Also is there some instructions for the install?? I know that it is basically pull off the old and put on the new, but what about the LINK ROD and the adjustment??? This may help... https://www.thelotusforums.com/forums/topic/79586-alunox-exhaust-manifold-installation/?page=2#comment-620846 Quote "Firearms stand next in importance to the Constitution itself. They are the American people’s liberty teeth and keystone under independence." - George Washington Link to comment Share on other sites More sharing options...
DrieStone Posted September 23, 2016 Report Share Posted September 23, 2016 1 hour ago, DJ Bob said: I ordered standard 2 1/2" system up to the turbo, without a CAT. I'm keeping the existing muffler/silencer. Leon put the value of my shipment at $2,500 which put me into a different category than everyone else. Why? I just got my full exhaust without cat and it was $97.08 for customs. I wonder if location has anything to do with it. Just be lucky, we didn't have to pay VAT which is 20%. Quote 1997 Jeep XJ | 1983 Lotus Turbo Esprit Link to comment Share on other sites More sharing options...
jcslocum Posted September 24, 2016 Report Share Posted September 24, 2016 My ups driver needed a $58 check to make delivery today. The beauty of the headers caused me to forget the fees. Part of the fee was duty, which is expected and part for customs clearance. Quote Jon - 1984 Esprit Turbo Link to comment Share on other sites More sharing options...
DJ Bob Posted September 24, 2016 Report Share Posted September 24, 2016 My biggest peeve is that the package is still in Louisville. Quote Link to comment Share on other sites More sharing options...
Zig Posted September 24, 2016 Report Share Posted September 24, 2016 Did you followup with UPS Customer service and have them explain what is going on and fix your delivery nightmare? If UPS screwd up the delivery records and showed 3 delivery attempts or location not found then they will send shipment back to clearing house and they might even return it to sender. You need to intervene and get them straighten this mess. UPS Customer Service number is 1 (800) 742-5877. Wishing you good luck and patience dealing with UPS morons... Zig Quote Link to comment Share on other sites More sharing options...
Zig Posted September 24, 2016 Report Share Posted September 24, 2016 7 hours ago, Htown said: This may help... https://www.thelotusforums.com/forums/topic/79586-alunox-exhaust-manifold-installation/?page=2#comment-620846 My manifold arrived fully assembled and perfectly aligned. 4 primaries double wall flanges are sealed together with red sealant... what is probably a high temperature compound. Before I start undoing ALUNOX assembly work and tear manifolds to loose pieces... I really need ALUNOX to confirm that this is the requirement and the correct installation procedure... not someone's assembly guide for previous generation manifold.. Zig Quote - If the 4 primaries are stuck, knock them off with a piece of Wood carefully, and clean up the double walls with brake cleaner, and eventually lightly sand the coupling surfaces, where applicable and finally smear them all with Wera 1400 degree celsius anti seize paste. That is your friend! Quote Link to comment Share on other sites More sharing options...
DJ Bob Posted September 24, 2016 Report Share Posted September 24, 2016 3 hours ago, Zig said: Did you followup with UPS Customer service and have them explain what is going on and fix your delivery nightmare? At least three phone calls per day for the last 2 days. According to UPS, it was still in Louisville at 11:30 last night but is cleared to resume movement south. Quote Link to comment Share on other sites More sharing options...
Popular Post MarkKassim Posted September 24, 2016 Author Popular Post Report Share Posted September 24, 2016 Hi Guys Just a quick note on fitting , don't strip the manifold down into its component parts, remove the old cast thing as per the manual. Clean all surfaces and threads. Fit the new manifold as a complete unit. Its a lot lighter than the original and so is easier to position. Fit the brace last , don't tighten the brace , it should be in a relaxed state i.e feel loose. I will try try and dig out a procedure we put up on an old thread some time ago if needed, Mark 3 Quote Link to comment Share on other sites More sharing options...
Zig Posted September 26, 2016 Report Share Posted September 26, 2016 On 9/25/2016 at 02:36, MarkKassim said: Hi Guys Just a quick note on fitting , don't strip the manifold down into its component parts, remove the old cast thing as per the manual. Clean all surfaces and threads. Fit the new manifold as a complete unit. Its a lot lighter than the original and so is easier to position. Fit the brace last , don't tighten the brace , it should be in a relaxed state i.e feel loose. I will try try and dig out a procedure we put up on an old thread some time ago if needed, Mark Mark, Please see if you can locate the proper installation procedure and let ALUNOX review and make any installation changes for this latest version of the exhaust manifold. BTW... I played a bit with uninstalled manifold trying to figure out the best method of turbo installation. I noticed that manifold flange was drilled and threaded with a larger diameter tap then the OEM Lotus cast iron manifold and turbo were designed for. Was it ALUNOX design/manufacturing error?. This forced me to use the Allen bolts provided instead of the new OEM stud set I had. Allen head bolts need to be inserted from the bottom of the manifold flange. Some required a lot of wiggling and twisting by hand before bolts allowed to be fully inserted. Turbo then needed to be slowly and evenly lowered while attachment nuts were being threaded on the bolts. Analyzing the difficulties involved in turbo installation and then proper turbo tightening... it is likely that this will force me to consider bolting turbo on the headers first and then try to install the headers with turbo as one unit. Zig Quote Link to comment Share on other sites More sharing options...
stormy69 Posted September 26, 2016 Report Share Posted September 26, 2016 I have purchased plenty of items from the UK, Dubai, Bahrain and Australia and never had to pay anything extra when they arrived. The really annoying part was not knowing this and having to have a check ready (march of 2011 was the last time i used one) for the driver. Mine will now arrive tomorrow. Thanks for the info on paying with a card zig, wish i had seen it sooner. Quote Link to comment Share on other sites More sharing options...
DaveS4s Posted September 26, 2016 Report Share Posted September 26, 2016 Questions, in the photos of the Stevens manifold is the link rod bracket take the place of the heat shield ?? if it goes with the heat shield then it looks like the studs on the cam housing will be too short. Also what fasteners are suppose to be used to mount the turbo?? the holes in the flange are threaded, but no fasteners in my kit are that big?? Zig said he was using the Allen head bolts to mount the turbo, but the photo of the Steven manifold shows Hex head bolts that are not in my kit??? It would have been nice if ALUNOX would have included a break down of what fasteners to use at each location. I know it is still early, but I just want to get everything clear before I start the install this Winter . Thanks DaveS4s Quote Link to comment Share on other sites More sharing options...
DJ Bob Posted September 26, 2016 Report Share Posted September 26, 2016 I (finally) got my system today. It is indeed beautiful and I can't wait to hide it in my car and make it turn blue. Any kind of installation guide would be very helpful. Quote Link to comment Share on other sites More sharing options...
Zig Posted September 27, 2016 Report Share Posted September 27, 2016 On 9/22/2016 at 15:10, DaveS4s said: Just received my manifold today, LOVE IT, Now that brings up some questions, (1) wrap it , (2) powder coat it , or (3) leave it the hell alone????. Do #4: Install and enjoy it Zig 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.