free hit
counters
Giugiaro & Stevens Esprit Turbo 321 Stainless Steel Manifold Group Buy - Page 7 - Site Sponsors & FFM Discounts - The Lotus Forums Jump to content
MarkKassim

Giugiaro & Stevens Esprit Turbo 321 Stainless Steel Manifold Group Buy

Recommended Posts

8th July we were all told - by my reckoning that's not until Friday. Patience - all good things come to those who wait.......and trust me, I've waited!

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

I had an email from Leon today to the same effect. They're actually 40% of the way through the production run already :D

  • Like 1

Share this post


Link to post
Share on other sites

Thank you both for the update.  Just to confirm; we should expect contact from Anita directly to arrange payment sometime early next week?

Craig

Share this post


Link to post
Share on other sites
6 hours ago, MarkKassim said:

Hi Guys,

                 I've spoken with Leon , Anita is actually back in on Monday morning and will be sorting out the Lotus payments as her first job. For the US guys the pound is at a 31 year low so now is a good time to make the payment. Also Alunox are in production with this Group Buy , I will try and get over this week end to have a look.

Mark

Fantastic.  Thank you for the update.

Share this post


Link to post
Share on other sites

Timing is everything!!!  Bank Transfers are a total PIA and are a bit costly, but they do work...

 

I just went to IOM a few weeks ago and bought a MV to ride while there. Bank transfer was tricky but any bank can do it. It's not something in the USA that we are used to doing and some banks won't do it. I hope they just that a Visa card and be done with it!!!

Share this post


Link to post
Share on other sites

Right following thee feedback that they are in production and almost half way through already it shouldn't be much more than a few weeks for them to finish the rest then I will add myself.

1)  @rocket63 - Stevens S4 1995 Manifold - UK

2)  @jcslocum (1984 G-Car just manifold)

3)  @pmlee  (Stevens SE, just manifold) - UK

4) @x180r19 (Stevens SE, just manifold) - CO, USA

5) @lewtus (Stevens SE, just manifold) style. (4 & 5) can ship together to CO, USA)

6) @Htown (Stevens SE, manifold only) Combine shipping with #4 & #5? - CO, USA

7) @greentengu G-car, just the manifold kit - PA, USA

8) @Bloodnok 1986 Turbo HCI Giugiaro  - Manifold only. - UT, USA

9) @chris  Stevens 1988 carb turbo - UK

10) @gfallon 1983 g-car manifold kit - MI, USA

11)  @NR2k- 1984 G car full system, no cat, standard turbo flange - UK

12)  @andmac - Stevens Manifold - UK

13) @Saturn Silver - Stevens GT3 manifold - Sweden

14) @Teava12 - Stevens manifold - French Polynesia

15) @stephenwhyte - G-car manifold - UK

16) @NigelM- G-car manifold + exhaust - UK

17) @CarSalesman - Stevens manifold - PA, USA

18) @DrieStone - G-car manifold + catless exhaust- CT, USA

19) @Mrbmist - Stevens manifold - MD, USA

20) @faykfox - Stevens manifold - NV, USA.

21) @dawn - Stevens manifold - Istanbul

22) @ATSAaron - Stevens manifold -TX, USA

23) @DaveS4s - Stevens manifold - GA, USA

24) Mattzx - G car full system (no cat) - '84 Giugiaro Turbo - UK  - Full System Based on 10 GB

25) keith95S4 G car full system (no cat)

26) Stormy69 - Stevens

27) Zig - Stevens

28) Quadcam - Stevens manifold for 93.5 -usa

29) @850 Combat - Stevens with external connection capped Oregon USA 97141

30) MrDangerUS one Stevens s4s manifold same option as Zig's ( without the wastegate port option, w/new collector option ), shipped to USA

31) Jenna'sEspritTurbo -  (1983 G-Car just manifold) Milford USA

32) Top Plumber - Stevens Manifold

33) Splashout - 1986 G-car manifold only for standard back box

I will get an email off shortly.

Share this post


Link to post
Share on other sites

Is this offer still available? I'm interested in a G-car system everything to the muffler

Edited by DJ Bob

Share this post


Link to post
Share on other sites

I'm in for a G car system up to the turbo.

1)  @rocket63 - Stevens S4 1995 Manifold - UK

2)  @jcslocum (1984 G-Car just manifold)

3)  @pmlee  (Stevens SE, just manifold) - UK

4) @x180r19 (Stevens SE, just manifold) - CO, USA

5) @lewtus (Stevens SE, just manifold) style. (4 & 5) can ship together to CO, USA)

6) @Htown (Stevens SE, manifold only) Combine shipping with #4 & #5? - CO, USA

7) @greentengu G-car, just the manifold kit - PA, USA

8) @Bloodnok 1986 Turbo HCI Giugiaro  - Manifold only. - UT, USA

9) @chris  Stevens 1988 carb turbo - UK

10) @gfallon 1983 g-car manifold kit - MI, USA

11)  @NR2k- 1984 G car full system, no cat, standard turbo flange - UK

12)  @andmac - Stevens Manifold - UK

13) @Saturn Silver - Stevens GT3 manifold - Sweden

14) @Teava12 - Stevens manifold - French Polynesia

15) @stephenwhyte - G-car manifold - UK

16) @NigelM- G-car manifold + exhaust - UK

17) @CarSalesman - Stevens manifold - PA, USA

18) @DrieStone - G-car manifold + catless exhaust- CT, USA

19) @Mrbmist - Stevens manifold - MD, USA

20) @faykfox - Stevens manifold - NV, USA.

21) @dawn - Stevens manifold - Istanbul

22) @ATSAaron - Stevens manifold -TX, USA

23) @DaveS4s - Stevens manifold - GA, USA

24) Mattzx - G car full system (no cat) - '84 Giugiaro Turbo - UK  - Full System Based on 10 GB

25) keith95S4 G car full system (no cat)

26) Stormy69 - Stevens

27) Zig - Stevens

28) Quadcam - Stevens manifold for 93.5 -usa

29) @850 Combat - Stevens with external connection capped Oregon USA 97141

30) MrDangerUS one Stevens s4s manifold same option as Zig's ( without the wastegate port option, w/new collector option ), shipped to USA

31) Jenna'sEspritTurbo -  (1983 G-Car just manifold) Milford USA

32) Top Plumber - Stevens Manifold

33) Splashout - 1986 G-car manifold only for standard back box

34) DJ Bob  1983 everything up to turbo

 

 
 
  •  

 

 

Share this post


Link to post
Share on other sites

A couple went missing back there , correct me if I'm wrong

1)  @rocket63 - Stevens S4 1995 Manifold - UK

2)  @jcslocum (1984 G-Car just manifold)

3)  @pmlee  (Stevens SE, just manifold) - UK

4) @x180r19 (Stevens SE, just manifold) - CO, USA

5) @lewtus (Stevens SE, just manifold) style. (4 & 5) can ship together to CO, USA)

6) @Htown (Stevens SE, manifold only) Combine shipping with #4 & #5? - CO, USA

7) @greentengu G-car, just the manifold kit - PA, USA

8) @Bloodnok 1986 Turbo HCI Giugiaro  - Manifold only. - UT, USA

9) @chris  Stevens 1988 carb turbo - UK

10) @gfallon 1983 g-car manifold kit - MI, USA

11)  @NR2k- 1984 G car full system, no cat, standard turbo flange - UK

12)  @andmac - Stevens Manifold - UK

13) @Saturn Silver - Stevens GT3 manifold - Sweden

14) @Teava12 - Stevens manifold - French Polynesia

15) @stephenwhyte - G-car FULL SYSTEM - UK

16) @NigelM- G-car manifold + exhaust - UK

17) @CarSalesman - Stevens manifold - PA, USA

18) @DrieStone - G-car manifold + catless exhaust- CT, USA

19) @Mrbmist - Stevens manifold - MD, USA

20) @faykfox - Stevens manifold - NV, USA.

21) @dawn - Stevens manifold - Istanbul

22) @ATSAaron - Stevens manifold -TX, USA

23) @DaveS4s - Stevens manifold - GA, USA

24) Mattzx - G car full system (no cat) - '84 Giugiaro Turbo - UK  - Full System Based on 10 GB

25) keith95S4 G car full system (no cat)

26) Stormy69 - Stevens

27) Zig - Stevens

28) Quadcam - Stevens manifold for 93.5 -usa

29) @850 Combat - Stevens with external connection capped Oregon USA 97141

30) MrDangerUS one Stevens s4s manifold same option as Zig's ( without the wastegate port option, w/new collector option ), shipped to USA

31) Jenna'sEspritTurbo -  (1983 G-Car just manifold) Milford USA

32) Top Plumber - Stevens Manifold

33) neverweaken - 1985 G car manifold - IRL

34) EW 89SE - Eric Winninger - Stevens U.S. market 1989SE Manifold only. Smooth collector type NO external wastegate option - USA 47408 postal code

35) Splashout - 1986 G-car manifold only for standard back box

36) DJ Bob  1983 everything up to turbo

I will try and get an update on rear systems for the Stevens Esprit later.

lotus cnc2.jpg

Mark

  • Like 1

Share this post


Link to post
Share on other sites

Mark- I didn't know if you received my other message, I would like Manifold / System – Stevens Car/ Full system 3" with 1 exhaust outlet on muffler. I would like to include a 1" high Oxygen Sensor Bung on the Down-pipe and a 3" V-Band Connector on the Turbo end. (Not the standard flange). I also sent this request to Leon and Anita. I've included pictures of my updated turbo.

image.jpeg

image.jpeg

Share this post


Link to post
Share on other sites

Mark,

 

Please let Leon know that the new Stevens collector design is very impressive.  

I am glad that Alunox machined double support points.  I was actually planning to TIG the second attachment point myself.  My approach was to use  Alunox  heat shield attachment on one side  and then run adjustable strut down to the bracket attached to trans bell housing bolts. The bell housing bracket I was planning to make would be triangular in shape and would bolt to the two nearest UN-1 bell housing bolts.

Hopefully Alunox attachment bracket design matches mine and save me some additional tinkering.

Zig

Edited by Zig

Share this post


Link to post
Share on other sites
On 7/9/2016 at 06:30, MarkKassim said:

A couple went missing back there , correct me if I'm wrong

1)  @rocket63 - Stevens S4 1995 Manifold - UK

2)  @jcslocum (1984 G-Car just manifold)

3)  @pmlee  (Stevens SE, just manifold) - UK

4) @x180r19 (Stevens SE, just manifold) - CO, USA

5) @lewtus (Stevens SE, just manifold) style. (4 & 5) can ship together to CO, USA)

6) @Htown (Stevens SE, manifold only) Combine shipping with #4 & #5? - CO, USA

7) @greentengu G-car, just the manifold kit - PA, USA

8) @Bloodnok 1986 Turbo HCI Giugiaro  - Manifold only. - UT, USA

9) @chris  Stevens 1988 carb turbo - UK

10) @gfallon 1983 g-car manifold kit - MI, USA

11)  @NR2k- 1984 G car full system, no cat, standard turbo flange - UK

12)  @andmac - Stevens Manifold - UK

13) @Saturn Silver - Stevens GT3 manifold - Sweden

14) @Teava12 - Stevens manifold - French Polynesia

15) @stephenwhyte - G-car FULL SYSTEM - UK

16) @NigelM- G-car manifold + exhaust - UK

17) @CarSalesman - Stevens manifold - PA, USA

18) @DrieStone - G-car manifold + catless exhaust- CT, USA

19) @Mrbmist - Stevens manifold - MD, USA

20) @faykfox - Stevens manifold - NV, USA.

21) @dawn - Stevens manifold - Istanbul

22) @ATSAaron - Stevens manifold -TX, USA

23) @DaveS4s - Stevens manifold - GA, USA

24) Mattzx - G car full system (no cat) - '84 Giugiaro Turbo - UK  - Full System Based on 10 GB

25) keith95S4 G car full system (no cat)

26) Stormy69 - Stevens

27) Zig - Stevens

28) Quadcam - Stevens manifold for 93.5 -usa

29) @850 Combat - Stevens with external connection capped Oregon USA 97141

30) MrDangerUS one Stevens s4s manifold same option as Zig's ( without the wastegate port option, w/new collector option ), shipped to USA

31) Jenna'sEspritTurbo -  (1983 G-Car just manifold) Milford USA

32) Top Plumber - Stevens Manifold

33) neverweaken - 1985 G car manifold - IRL

34) EW 89SE - Eric Winninger - Stevens U.S. market 1989SE Manifold only. Smooth collector type NO external wastegate option - USA 47408 postal code

35) Splashout - 1986 G-car manifold only for standard back box

36) DJ Bob  1983 everything up to turbo

I will try and get an update on rear systems for the Stevens Esprit later.

lotus cnc2.jpg

 

Machining and machinery porn right there boyo!!!

  • Like 1

Share this post


Link to post
Share on other sites

Hi Tommy(Mrbmist),

                              Yes Alunox do both a single and twin exist rear system in 3' ,I will get a price update but can see yours would be a one off due to the different flange, would you be able to supply exact dimensions so I can get Leon to look at it.

                                         Mark

Share this post


Link to post
Share on other sites

Hi Mark- The Turbo is T-3 Flanged on Manifold side (same as factory), Standard 3" Diameter V-band A/R 48 on outlet.

-Tommy

Ar 48.JPG

Share this post


Link to post
Share on other sites
2 hours ago, Mrbmist said:

Hi Mark- The Turbo is T-3 Flanged on Manifold side (same as factory), Standard 3" Diameter V-band A/R 48 on outlet.

-Tommy

Ar 48.JPG

That exit flange is centered on the turbine. The exit flange on the stock Stevens turbo is NOT centered on the turbine. So the exhaust will be off. 

Aaron

Share this post


Link to post
Share on other sites

Still waiting to hear back from Anita about how to make the payment.

Share this post


Link to post
Share on other sites

Anita sent a group e-mail out this morning for those that had responded. They are still waiting on information from some of the group members (at least nine members are still to forward their details). .

She said they will be contacting us individually shortly in order to answer our questions and queries in relation to special requests etc.  They will then be issuing invoices with payment details accordingly

Share this post


Link to post
Share on other sites

I just hopped back here to see the status of things and noticed a lot of movement, so I sent a message to anita maybe an hour before the above post. So hopefully that number is now down to 8 outstanding members. :D

Share this post


Link to post
Share on other sites
6 hours ago, Mrbmist said:

Anita sent a group e-mail out this morning for those that had responded. They are still waiting on information from some of the group members (at least nine members are still to forward their details). .

She said they will be contacting us individually shortly in order to answer our questions and queries in relation to special requests etc.  They will then be issuing invoices with payment details accordingly

I haven't received an email yet

Edited by DJ Bob

Share this post


Link to post
Share on other sites

Bob, suggest you resend your email to Anita at alonux as she replied to the group today.

  • Like 1

Share this post


Link to post
Share on other sites

I did but with the time difference they are closed now, and I don't want to be a PITA with too many emails. Right now I'd just like to find out if I'm in on the group buy so if I'm not I can start looking for a replacement part for my car.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...