free hit
counters
GFWilliams Liquid Yellow, Slightly Modified, Exige V6 - Page 66 - V6 Exige Projects & Upgrades - The Lotus Forums #ForTheOwners Jump to content


GFWilliams Liquid Yellow, Slightly Modified, Exige V6


Recommended Posts


Upgrade today to remove Google ads and support TLF.

New springs look much better!

I haven’t changed the fronts, I’ve always thought the balance is a bit off and rear too stiff.  IMO, always best to only change one thing at a time with suspension so you really get to understand exactly what each change does.  I will report back about handling balance and further thoughts once I’ve set the heights and test driven tomorrow.
 

39CEF6F9-CA30-44CF-B279-0C44EC3CE98E.thumb.jpeg.130ec80ae199f65d363038158d76dd18.jpeg

  • Like 2
Link to comment
Share on other sites

On 22/03/2021 at 06:58, GFWilliams said:

Little update... Spring clean was needed on my car and a few weeks ago I spent the day under the car using dry ice to clean the underside of the car and then protecting it with spray wax.   Dry ice is a non abrasive way of cleaning mechanical components and I was very impressed. It doesn't strip the surface coatings, only the dirt, so this is just a way of cleaning properly to then be able to protect for longer.   Eventually I'll do a full suspension refresh, but this has helped to protect it for a good while longer.  The trick if using wax to protect the underside of a car is to do it regularly, and as I didn't have a garage for a while I'd let it slip. In future I'll do it at least every 6 months.

Under the sea before image:

GFW_3486web.thumb.jpg.9c23b3cdaffc3a9b784aee4eefe24fd3.jpg

After looking much much better:

GFW_3628web.thumb.jpg.3673cb8cee53c562f2a3c8cd96fbb437.jpg

 

Before/after split image which shows how much better the car looks now!

GFW_3475web.thumb.jpg.46de9ed704c99e16bd837aeeb4664a23.jpg

 

My exhaust has been blowing and getting worse recently, and I suspected it was the Flexi in the Y pipe (again! This is my second one now). The decat link pipe I'd put in before was a bit of a nightmare to fit and was putting too much pressure on the flexi due to not fitting perfectly. Unfortunately this means the expensive Y pipe now has to go in the bin. To try to fix the problem more long term, I've decided to put in a 400 series Y pipe with the sports cat from Komotec.  @Seriouslylotusnow keeps Komo-tec in stock, so it was with me the next day!

Before anyone comments, yes it's suppose to have the "dent". This is to fit around the gearbox.  Hopefully by having a full komotec and OEM system now, instead of a mix of komotec and 2bular, it'll fit a bit better and not cause any future problems.

816617939_WhatsAppImage2021-03-13at11_42_00.thumb.jpeg.b233e86824daef1c07e66558a5f1e769.jpeg

536275693_WhatsAppImage2021-03-13at11_42_20.thumb.jpeg.a0dd63187ac34a95cf4cb3ea4d1aa5a7.jpeg

Car will be a bit quieter with a cat back in, but to be honest, I'm fed up of it being so loud anyway, so it'll be nice change. 

Eventually I'll buy the new komo-tec quiet exhaust so I can do trackdays again, as this Y pipe doesn't fit my old quiet exhaust (nothing's ever easy is it...)

Shocked that they just dont transition to tubular piping for that

Link to comment
Share on other sites

  • 3 weeks later...

Nice to get out for a little drive this morning. Not much to report on the car, although I am planning to get clams off this winter and build it back up to make sure everything is perfect. I’ll be starting to acquire parts soon for the project which will be fun!

C0944FCA-B2A8-49C6-9554-6ED214DDD3EA.thumb.jpeg.d3a5b8c1e4db1e00d15730c57e9b0395.jpeg

6468621B-EE97-4BA7-BC52-612F575EE4F9.thumb.jpeg.d306ed34ca97a04538e1530196e567ae.jpeg

  • Like 1
  • Love 1
Link to comment
Share on other sites

  • 2 weeks later...
6 minutes ago, Diablos-666 said:

That bottom photo looks the dogs! 
 

what rear hatch is that you got?

It's the carbon rear hatch from the 380 Cup/410 Sport/420 Sport/430 Cup.  Was painfully expensive... 

Link to comment
Share on other sites

  • Gold FFM

Oh, I thought it was created by Nordik Elves, in the bowels of a volcano, on anvil made form Thor's hammer, with the carbon ashes of a phoenix, and fired over a 1,000 year lava flow. Hence the cost!

Alcohol. Sex. Tobacco. Drugs. Chocolate.  Meh! NOTHING in this world is as addictive as an Evora +0. It's not for babies!    

The first guy to ride a bull for fun, was a true hero. The second man to follow him was truly nuts!   

Link to comment
Share on other sites

  • 3 weeks later...

@GFWilliamsInteresting because the subframe brackets are riveted on. Also, I do have the Lotus dimensions for the cutouts for the rear clam if you would like them.

Later,
Eldon

  • Like 1
Link to comment
Share on other sites

@EldonZ - I plan on bolting through the subframe. Will finally fit my rear tow strap mount too.   The template for the cutting would be very useful!  I've measured on @Arun_D's car, but the more I can be sure before cutting into my car the better!

This is how the brackets are mounted on @Mattmahope's car.

1250336850_WhatsAppImage2021-05-01at15_05_26.thumb.jpeg.d7c8d5d1583a763a9dd72d65da10abf8.jpeg

Link to comment
Share on other sites

@EldonZ  -- Eldon, have you been storing your CupR under water?  ;) 

@GFWilliams -- George, please have them made 2" taller than stock, and I'll even buy a set.

Jack
2008 2-Eleven
2015 Exige V6 CupR
Track videos ... http://www.youtube.com/jackcup
2010 Lotus Challenge Series ULTRA Class champion
2012 Lotus CUP USA OPEN Class champion

Link to comment
Share on other sites

@EldonZ Thanks for the document, it's very useful!

I've been working on my car quite a lot recently with it on axle stands for the last few weeks. It started with simply needing to replace the metal vacuum pipe that goes through the subframe and over the exhaust as it had corroded and was causing a vacuum leak. Plus I needed to install the new exhaust hangar for the KT 380/410 downpipe.

The vacuum pipe was a bit of a horrible job as the bolt for the bracket is hard to get to with everything still in place (I loosened off the cat and backbox to allow a bit of space though). Eventually got it in there though, started it up and it went into quiet mode!  Great!  Tried switching it into loud mode and it wouldn't switch anymore... Swearing happened. After checking various things, I concluded that the signal to the solenoid switch was okay, but the switch wasn't actually working. Very annoying as it was replaced earlier this year when I fitted the downpipe and it was working then.   New one ordered from B&C and quick service as always, shame the part was £94.50 though.

While the car was up in the air and I was waiting for parts I decided to also do:
 - Paint subframe to protect it longer term. Also painted the upper wishbones which hopefully keeps them rust free for longer.

 - Paint inside the wheel arches with stonechip paint. This is a bit of an experiment to see how long it lasts, the car will have some professional paintwork later this year so I'm not too precious about the edge or finish, but I want to know how well the finish holds up. Plus I think it looks a lot better in black than in body colour (with bare GRP showing through from all the chips!)

 - Clean all under arches and under tray and diffuser.

 - New stainless bolts for under tray and pro bolt black bolts for diffuser. 

 - Spotted the pipe that goes between the side intake and the KT airbox was loose, so reconnected it.

Arches look much better:

IMG_9920.thumb.jpg.4222564c6d806978d31626e44777c4f9.jpg

Intake pipe loose... I wiped down around it, don't worry!
IMG_9916.thumb.jpg.3233d5350d080ba945dfe04e169876e2.jpg

 

 

Link to comment
Share on other sites

New parts!  

Cup holder that I got anodised black, I like how subtle it is.  I'll get a strap made up in black Alcantara I think.  Has made me wonder if I should anodise the other parts which are silver in the cabin... 

IMG_0141.thumb.jpg.f169029a308631b3f1a272d6a658bdff.jpg

Also, the Lazer lights have arrived, this is what I'm thinking, but I want to cut the front grill and recess them back so they're not quite so in your face... 

IMG_0088.thumb.jpg.a0395097319fe881c03147242f4d2228.jpg

  • Like 1
Link to comment
Share on other sites

I think a bit of contrast works well (as in the clear anodised aluminium), but for the cupholder black is appropriately discreet for me, as it's not something I'd usually look to highlight.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...