RedViper Posted February 20, 2017 Report Share Posted February 20, 2017 Hi Does anyone have the geometry specification for the S380 please? Thanks Quote Link to comment Share on other sites More sharing options...
French Frie Posted February 21, 2017 Report Share Posted February 21, 2017 I asked to my workshop, and the answer was : same specs as Sport 350, but with 0.12° total toe out (vs 0.06° on S/350) ... tyre pressure (PS Cup 2) : 2.0/2.2 (F/R) 1 Quote Link to comment Share on other sites More sharing options...
RedViper Posted February 21, 2017 Author Report Share Posted February 21, 2017 Im sure you can guess what my next question is.... whats the official geo for the S350 Quote Link to comment Share on other sites More sharing options...
French Frie Posted February 21, 2017 Report Share Posted February 21, 2017 (edited) I assume I posted it few months ago ... but here it is : Edited February 21, 2017 by French Frie Quote Link to comment Share on other sites More sharing options...
RedViper Posted February 21, 2017 Author Report Share Posted February 21, 2017 (edited) Thanks. I thought you needed a minimum of 1.5 degrees negative camber for the Cup 2's to work? if the S380 has these then maybe there are more differences? I shall email lotus direct and ask them. I am getting the geo on my Exige S checked in couple of weeks and was planning on copying the S380 specs. Cheers Edited February 22, 2017 by Bibs Quote Link to comment Share on other sites More sharing options...
French Frie Posted February 21, 2017 Report Share Posted February 21, 2017 can't tell you more ... I run -1° of camber on front tyres on mine, but on Super Sports, and it is really better than stock (-0.2°) and first try (-0.7°)! IIRC, steering rack fixing points were also modified on 350/380 ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.