Glyn Harper 55 Posted December 21, 2017 Report Share Posted December 21, 2017 (edited) As I have my gearbox out, I'm looking to replace the big 2" mild steel washers that sit between the mounting brackets for the gearbox, and the rubber mounting. My plan is to get some made by a laser cutting company who can work with Titanium, as they'll be light, strong, and won't corrode! We all love Titanium, or we wouldn't have lightweight sports cars. There are two for the gearbox mounts, however, I just checked and there are 6 in total per car. Two for the gearbox mounts, and two on either side of the mounting rubbers for the radius arms to the chassis. They are also the same across all cars, 88 onwards. Didn't check the Giugiaro cars, so I'm going to post this in the V8 section as well. (well, a link to this thread). Obviously if I get a load done it's going to get considerably cheaper. So.. any interest? If there is, please say below, and how many you'd like. I image most people will want either 2 or 6, but up to you. I've actually created a poll so you can use that, probably easier for me to work out if you do it that way. If there is no interest I may just get some done myself as long as they're not about 3 million pounds each. Once I have some ideas of price, I'll go back to the company and see what they can do for bulk. So, no idea on an actual price yet, this is just an interest thread at this stage. Cheers. Edited December 21, 2017 by Glyn Harper Quote Link to post Share on other sites
Jacques 959 Posted December 23, 2017 Report Share Posted December 23, 2017 Definately interested in these made in a quality titanium grade. Anyway, I just bought all the parts for doing these Things anyway, so a set in titan, would be a great time to fly by my garage now Kind regards, Jacques. Quote Nobody does it better - than Lotus Link to post Share on other sites
Glyn Harper 55 Posted December 23, 2017 Author Report Share Posted December 23, 2017 I think it will be a little while before I get them. The company I have asked for a quotation have finished for Christmas. Hopefully not too long though. Quote Link to post Share on other sites
Buddsy 1,641 Posted December 23, 2017 Report Share Posted December 23, 2017 I used stainless but you could do in titanium. In titanium turned from bar would be £6.50 each. buddsy 2 Quote "Belief is the enemy of knowing" - Crrow777 Link to post Share on other sites
Glyn Harper 55 Posted December 23, 2017 Author Report Share Posted December 23, 2017 Ace, cheers for that. I’ll see what this other company come back with first in the new year. Quote Link to post Share on other sites
Barrykearley 6,969 Posted December 23, 2017 Report Share Posted December 23, 2017 1 hour ago, Buddsy said: I used stainless but you could do in titanium. In titanium turned from bar would be £6.50 each. buddsy That is a picture of utter beauty 1 1 Quote Only here once Link to post Share on other sites
Glyn Harper 55 Posted December 30, 2017 Author Report Share Posted December 30, 2017 (edited) Just seen there are another load of candidate washers to be made of Titanium. There are 12 per car of 1 3/4" by 1/8" with 1/2" hole washers as well.. the ones for the lower and upper links.. I'm going to price those up too. Edited December 30, 2017 by Glyn Harper 1 Quote Link to post Share on other sites
eeyoreish 890 Posted December 30, 2017 Report Share Posted December 30, 2017 On 23/12/2017 at 22:29, Barrykearley said: That is a picture of utter beauty Agreed. Who doesn't love a well painted Thermalite block. 1 Quote Not worth starting anything now...🍺 Link to post Share on other sites
Glyn Harper 55 Posted January 12, 2018 Author Report Share Posted January 12, 2018 Chaps, these washers are looking like being about £5 each, so £30 for the set of 6 big ones, and another £60 if you want the set of 12 smaller ones. Shipping on top. (A fiver probably). Are people still keen at these prices? The cost isn't a massive outlay so I can get the material and get them cut before anyone pays anything, so they're ready to go when once paid. I'm quite happy to post copies of the invoices for the materials and cutting when I've got it done, so you can be assured I'm literally just going to sell them at cost. What do I get out of that? The price we all pay (me included!) is much less than if I were to just get a set done for myself. Cheers. Quote Link to post Share on other sites
Jacques 959 Posted January 14, 2018 Report Share Posted January 14, 2018 Bring it on! Jacques Quote Nobody does it better - than Lotus Link to post Share on other sites
fjmuurling 66 Posted January 14, 2018 Report Share Posted January 14, 2018 Hi Glyn, what are the lotus partnumbers for the washers? A079W4083F (smaller ones) and A075W4006Z (big ones) if I'm right? Quote Esprit Freak Link to post Share on other sites
Glyn Harper 55 Posted January 14, 2018 Author Report Share Posted January 14, 2018 48 minutes ago, fjmuurling said: Hi Glyn, what are the lotus partnumbers for the washers? A079W4083F (smaller ones) and A075W4006Z (big ones) if I'm right? Yes, it's those ones. I think what I'll do initially is get one sheet cut out, and see what the demand is like. If I sell them all, I can always get another sheet cut afterwards. So watch this space! I'll order the material tomorrow. Quote Link to post Share on other sites
Sparky 2,861 Posted January 14, 2018 Report Share Posted January 14, 2018 If they don't sell, just call them a cryptocurrency, sit back, and relax. 2 Quote British Fart to Florida, Nude to New York, Dunce to Denmark, Numpty to Newfoundland. And Shitfaced Silly Sod to Sweden. Link to post Share on other sites
Glyn Harper 55 Posted January 14, 2018 Author Report Share Posted January 14, 2018 Not at the moment! Crypto currencies have flattened out a little. I've got a load of Ethereum and Ripple. Quote Link to post Share on other sites
Glyn Harper 55 Posted January 18, 2018 Author Report Share Posted January 18, 2018 Just for anyone watching this thread, I've ordered the titanium sheet which has been posted and should be getting water jet cut next week. The sheet was £120 but we should get about 30 of the big washers and 30 of the smaller ones out of that. When I have the cutting cost including postage and I actually have them in my hand, I'll be able to take actual orders... hopefully next week sometime. Quote Link to post Share on other sites
Glyn Harper 55 Posted January 25, 2018 Author Report Share Posted January 25, 2018 Ok! I've got the washers! I've got 60 of the larger washers for the gearbox mounts and the radius arms (6 per car... part number A075W4006Z) and 70 of the smaller ones (12 per car total.. part number A079W4083F) They were cheaper than the original quote as the company who sent the material sent a larger piece they had for no extra money, so I was able to get more cut and divide the price a bit more. So, the larger ones are £4 each, and the smaller ones are £3.50 each. If you would like some (I hope people do!) then PM me and I'll get a quote done based on quantity and postage to wherever you are. I really need to convert this into a proper sales thread.. can any of the admins approve me to do that please? Here are some photos.. Showing all the washers, and showing the weight of an original steel washer next to the weight of a titanium one. Big difference when you consider the total amount needed per car! 1 Quote Link to post Share on other sites
Jacques 959 Posted January 25, 2018 Report Share Posted January 25, 2018 Super Duper! PM sent. jacques Quote Nobody does it better - than Lotus Link to post Share on other sites
Jacques 959 Posted February 4, 2018 Report Share Posted February 4, 2018 Guys, I bought a set from Glyn of these nice very light washers in titanium. And I can only recomment them to anyone, incl. some of you brit people, WHO tend to drive your Esprit's all year round. Anyway, more on my own thread later, when I get to install it all. And of course, less weight What's not to like. Thanks to Glyn. Cheers, jacques 2 Quote Nobody does it better - than Lotus Link to post Share on other sites
fjmuurling 66 Posted February 6, 2018 Report Share Posted February 6, 2018 I also bought a set from Glyn. More than happy with them and great service from Glyn. Freek Quote Esprit Freak Link to post Share on other sites
Glyn Harper 55 Posted February 6, 2018 Author Report Share Posted February 6, 2018 2 hours ago, fjmuurling said: I also bought a set from Glyn. More than happy with them and great service from Glyn. Freek Thanks. I've got about 6 sets of the large washers left, but only one set of the smaller washers left if anyone wants them. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.